manualshive.com logo in svg

Mizuho MOT-VE100, Руководство оператора

Поделиться
Скачать
Mizuho MOT-VE100 Скачать руководство пользователя страница 49

47

A

Electromagnetic Compatibility

App.-1 

Electromagnetic Compatibility

Install and operate according to the EMC information provided in this manual.

WARNING

• Do not use any accessories other than those specified by our company.

This can result in increased emissions and reduced immunity.

•

Do not use it adjacent to or stacked with other equipment.
Normal operation may not be possible due to electromagnetic interference.

•

Before using other medical electronic devices (especially life support devices) to
be used together, make sure that they will not malfunction due to electromagnetic
interference.
Normal operation may not be possible due to electromagnetic interference.

Guidelines and manufacturer declaration – electromagnetic emissions

The MOT-

VE100

 is intended for use in the electromagnetic environment specified below.

The customer or user of the MOT-

VE100

 must ensure that it is operated in suchlike environments.

Electromagnetic 
interference measurements

Compliance

Electromagnetic environment – guideline

Harmonic emissions
IEC 61000-3-2

Class A

The MOT-

VE100

 is suitable for use in all establishments, 

other than domestic establishments and those directly 
connected to the public low-voltage power supply network 
that supplies buildings used for domestic purposes.

Voltage fluctuations /
flicker emissions

IEC 61000-3-3

Complies

RF emissions
CISPR 11

Class A

RF emissions
CISPR 11

Group 1

The MOT-

VE100

 uses RF energy only for its internal 

function. Therefore, its RF emissions are very low and 
are not likely to cause any interference in nearby 
electronic equipment.

Содержание MOT-VE100























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды