manualshive.com logo in svg

Mizuho MOT-VE100, Руководство оператора

Поделиться
Скачать
Mizuho MOT-VE100 Скачать руководство пользователя страница 21

19

4

Operation

4.2  Turning on/off the power

„

„

When the medical grade wall outlet is used

„

z

Turning on the power

1.

Turn on the power switch on the base.

The power switch (green) and the battery indicator will be lighted on.

2.

Press 

 of the control unit.

The power lamp (green) of the control unit lights up and the power is
turned on.

Power lamp

„

z

Turning off the power

1.

When the power is turned on, press

 of the control unit.

The power lamp (green) of the control unit go out.

Power lamp

2.

Turn off the power switch on the base.

The power switch (green) and battery indicator go out, and then
the power is turned off.

NOTE

•

In an emergency or when
turning off the power
completely, disconnect
the power cord from the
medical grade outlet.

•

If you press 

 of the

control unit before turning
on the power switch on the
base ,the battery power will
be turned on.

•

During use with the battery
power, the power is
automatically turned off if
no operation is performed
for 2 hours or more.

NOTE

•

If you turn off the power
switch on the base before 
pressing 

 on the control 

unit, the battery power will 
be turned on.

Содержание MOT-VE100























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды