manualshive.com logo in svg

Mizuho MOT-VE100, Руководство оператора

Поделиться
Скачать
Mizuho MOT-VE100 Скачать руководство пользователя страница 35

33

4

Operation

4.12  Adjusting the head plate

The head plate can be bent in 15° increments, to 4 different positions upward (maximum 60°) and to 6 
different positions downward (maximum 90°). The head plate can also be detached.

„

„

Bending the head plate

WARNING

•  Make sure to tighten the head plate fixing handle securely.

 

If the head plate moves with the handles in a 
loosened state, the patient may get injured.

• 

The head plate weighs 7 kg (15.5lbs).  
Pay special attention when handling it. 
It may drop and cause damage or injury.

1. 

Pull the head plate flexing lever in the head direction. 

The head plate can be bent upward and downward. When 

release the lever, the head plate is fixed in that position.

Head plate 

flexing lever

„

„

Detaching the head plate

WARNING

The head plate weighs 7 kg (15.5lbs).  
Pay special attention when handling it.
It may drop and cause damage or injury.

1. 

Loosen the two head plate fixing handles located on the 

lower side of the back plate.

2. 

Hold the both sides of the head plate firmly and pull straight.

Head plate fixing handle

Back plate

Head plate

NOTE

When bending upward, the 
head plate can be lifted and 
bent without pulling the head 

plate flexing lever.

Содержание MOT-VE100























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды