manualshive.com logo in svg

Mizuho MOT-6702, Руководство оператора

Поделиться
Скачать
Mizuho MOT-6702 Скачать руководство пользователя страница 29

Page 28 

SECTION II  OPERATION 

 

 

 

x

Prior to unlocking brakes, check for ob-
structions on the floor that might pre-
vent the table from moving smoothly to 
new location. Relock the brakes imme-
diately once the final position is 
reached and before commencing sur-
gery. Table brakes should remain locked 
at all times if patient weight exceeds 
230 kg. 

SERVICE ACCESS

COVER

EMERGENCY

BRAKE RELEASE

BRAKE (4)

POWER

CORD

 

Figure 2-19. Emergency Brake Release 

NOTE 

x

The Emergency Brake Release Valve 
must be closed and tightened (coun-
ter-clockwise) before activating any hy-
draulic function. 
 

x

If the Emergency Brake Release Valve 
has been operated, the BRAKE 
UNLOCK button on the pendant control 
will have to be pressed before brakes 
will lock again. 

 
 

2-10. Head Section 

 

a. 

A quick release positioning bar located under 

and to the front of the head section (figure 2-20) is 
used to raise or lower the head section. Pull the 
release bar toward the head end to allow the section 
to pivot up or down. Positioning from 60° above 
horizontal to 90° below horizontal in 15° increments 
is available. Release the bar to lock the head section 
in position. 

HERD SECTION

RELEASE BAR

 

Figure 2-20. Head Section Adjustment 

 

b. 

By loosening two locking knobs beneath the 

back section, an additional 50 mm of longitudinal 
adjustment can be achieved. If desired, the head 
section may be removed by loosening the locking 
knobs and pulling it straight out of the back section. 
 
The 6702 Table has the capability of attaching the 
head section to the leg section for use as a foot ex-
tension ONLY. Do not reverse the patient on the 
table without first consulting with MIZUHO. 
 
Two locking knobs are located on the inside of the 
leg section for securing the head section. See figure 
2-21. 

LOCKING
KNOB

LOCKING
KNOB

FOOT/LEG
SECTION

HEAD
SECTION

 

Figure 2-21. Repositioning Head Section 

(for use as a Foot Extension) 

 
 

Содержание MOT-6702












































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды