Page 25
SECTION II OPERATION
e. Elevation
To raise table top, press the
ENERGIZE button and then the TABLE UP button
(figure 2-10). The table will lift a patient weight of
540 kg up to a maximum height of 1053 mm (1143
mm with X-Ray top and 50 mm pad). To lower the
table top, press the ENERGIZE button and then the
TABLE DOWN button. The table top will go down to
a minimum height of 600 mm.
TABLE UP
TABLE DOWN
1053 mm
600 mm
ENERGIZE
Figure 2-10. Elevation Function
f. Leg Section
To lower the leg section, press the
ENERGIZE button and then the LEG DOWN button
(figure2-11). The leg section will go down to 100°
below horizontal. To raise the leg section, press the
ENERGIZE button and then the LEG UP button. The
leg section will go up to 20° above horizontal.
WARNING
The Leg section may hit the table base
or the floor if both the leg and elevation
systems are placed in their full down
position.
LEG UP
LEG DOWN
100°
20°
ENERGIZE
Figure 2-11. Leg Section Positioning
g. Flex Positioning
To place the table top in a flex
position from horizontal, press the ENERGIZE but-
ton and then the FLEX button (figure 2-12).To return
the table top to a horizontal position or into a reflex
position, press the ENERGIZE button and then the
LEVEL or REFLEX button.
NOTE
When REFLEX button is activated, if
Kidney Bridge is up, the back section
will not go above horizontal.
FLEX
REFLEX
ENERGIZE
Figure 2-12. Flex/Reflex Positioning
