Mitsubishi TEJ100A, Руководство по эксплуатации

Страница: 62 / 68

-
56
-
1
5
2
6
3
7
9
4
8
10
9 For emergency
Alarm display
RUN/STOP
F2
PRESET
MENU
DEFROST
F3 F4 F1
●
If any error occurs, the abnor-
mal display lights or blinks
on the LCD (the backlight lights
or blinks).
● Check the alarm code displayed
at the right-hand side of the
abnormal display. (If it is a light
error, the alarm content at the
right-hand side of the alarm code is not displayed.)
When no error code is displayed at the LCD, change to the alarm display as
described below, and check the alarm content.
r
C
⁅⁗⁦
( ›⁂‒″⁔⁠⁡⁤ ⁓⁞⁞‒⁚⁛⁙⁚
r
C
Abnormal display
Alarm code Alarm content
‵⁞⁗⁓⁤ ‴⁓⁕⁝
″⁞⁓⁤
(
(
( -DQ
-DQ
1RY
Switching "Normal display" and "Alarm display"
7
Switching from "Normal display screen" to "Alarm display mode"
Press once each on the [MENU] switch, [F3( )] switch and [F4(Select)] switch.
(The display returns to the "Normal display screen" 20 seconds later.)
Switching from "Alarm display mode" to "Normal display screen"
Press the [F1(Back)] switch 2 times on the extended display of "Alarm display
mode". (The screen changes to "Normal display screen" in 20 seconds in case
of 1 press.) or hold down [MENU] switch.