Mitsubishi TEJ100A, Руководство по эксплуатации

Страница: 22 / 68

-
16
-
1
5
2
6
3
7
9
4
8
10
3 Precaution for safety
Handling of electric equipment and power codes
WARNING
• Do not splash water on the electric
equipment directly or wash it with
water.
• Do not touch the electric equipment
or operate the switches with wet
hands.
• Do not modify the power code or apply
force on it, by bending it by force, pulling
it strongly or twisting it, or do not put
cargoes on it.
• Do not wet the electric equipment. In particular, do
not wet the electric equipment inside the control box
in a rain or snow.
• Do not spill any drink such as coffee or water on the
cabin controller.
• Otherwise, it may cause troubles of electric circuit, damages of
power supply code or an electric shock.
• Use 4-core cabtyre cables (conductor
cross section with 5 mm
2
or more)
for power cable. Do not connect it to
extension code. (
☞
Refer to page 36.)
• Pull out the power code by holding the
plug part at the end of the code.
• Check the plug of the power code for
dust. If there is no dust, insert it fi rmly.