Mitsubishi TEJ100A, Руководство по эксплуатации

Страница: 46 / 68

-
40
-
1
5
2
6
3
7
9
4
8
10
5 Operation
RUN/STOP
F2
PRESET
MENU
DEFROST
F3 F4 F1
Setting the preset temperature
1 Start the refrigeration unit. ( ☞ Page 37)
⇒ The display changes to the preset
setting screen. Right figure shows
the setting values at the shipping
from factory.
⇒ In the “Preset (Zone selection)”
mode (Right figure), press “F2
(Zone A)” or “F3 (Zone B)” switch
to select the compartment of which the setting temperature is changed.
⇒ The display changes to the mode screen of Step ３ below. Further proce-
dure is same as in the case of 1-compartment model.
3 [In case of 1-compartment model]
Press the “Preset” switch.
F2 F3 F4 F1
⇒ Desired preset temperature is set,
and the display returns to the
normal display screen.
4
Press “F1 (~ F4)” switch.
F2 F3 F4 F1
⇒ The preset temperature is regis-
tered, and the display returns to the
normal display screen.
4 [Preset registration of current
setting temperature]
Hold down “F1 (~ F4)” switch for
3 seconds.
F2 F3 F4 F1
2 [In case of 2-compartment model]
Press the “Preset” switch.
F2 F3 F4 F1
㸫Υ Υ Υ 㸫Υ
‵⁧⁤⁤⁗⁠⁦‒⁥⁗⁦⁦⁛⁠⁙
㸫Υ
㸫Υ Υ Υ 㸫Υ
‵⁧⁤⁤⁗⁠⁦‒⁥⁗⁦⁦⁛⁠⁙
㸫Υ
㸫Υ Υ Υ 㸫Υ
‵⁧⁤⁤⁗⁠⁦‒⁥⁗⁦⁦⁛⁠⁙
㸫Υ
⁌⁡⁠⁗‒″ ⁌⁡⁠⁗‒‴ ‴⁓⁕⁝
⁂⁤⁗⁥⁗⁦‚⁌⁡⁠⁗‒⁥⁗⁞⁗⁕⁦⁛⁡⁠‛
1
2・3
4
Set
ⅈ
r
C
⅊
⁅⁗⁦
‵⁡⁡⁞⁛⁠⁙
r
C
Register