7
(2) Station number/Mode setting switches
Used to set the station number and mode of the network module. (Factory
default setting: 1)
Set the same operation mode to all network modules.
Setting
10
1
Indication
0 0
Setting
error
(The ERR. LED turns on.)
0 1
to
3 2
Station number 1 to 32 (online.)
3 3
to
9
y
0 to 9
TEST 0
to
6
Setting error
(The ERR. LED turns on.) *1
TEST 7
Self-loopback
test
TEST
8
Internal self-loopback test
10 10s unit
1 1s unit
TEST 9
Hardware
test
*1: The ERR. LED does not turn on in red if the station
number is set equivalent to 33 to 64.
(3) Spring clamp terminal block
Used to connect a twisted pair cable or CC-Link Ver. 1.10-compatible cable
(Refer to Section 5.1.2 (2)(b)).
(4) Serial number plate
Indicates the serial number of the network module.