A-3
[STARTING AND MAINTENANCE PRECAUTIONS]
[DISPOSAL PRECAUTIONS]
z
Do not touch the terminals while they are live.
This will cause malfunctions.
z
Make sure to switch all phases of the external power supply off before
cleaning or re-tightening the terminal screws. Failure to do so will cause
failure or malfunction of the module.
Not doing so can cause failure or malfunction of the module.
z
Do not disassemble or tamper will the module.
This will cause failure, malfunctions, injuries or fire.
z
Make sure to switch all phases of the external power supply off before
mounting or removing the module.
Failure to do so will cause failure or malfunction of the module.
z
If a voltage is input when a current input range is selected, failure may occur.
z
Do not install/remove the terminal block more than 50 times after the first use
of the product. (IEC 61131-2 compliant)
z
Always make sure to touch the grounded metal to discharge the electricity
charged in the body, etc., before touching the module.
Failure to do so may cause a failure or malfunction of the module.
z
When disposing of the product, treat it as industrial waste.
WARNING
CAUTION
CAUTION
