Mitsubishi HS-1096E, Инструкция по установке и эксплуатации

Страница: 25 / 32

25
Installation
Reference page
ENGLISH
REPEAT : Rewinds the tape to the beginning and resumes
the recording. When CALL OUT is set to
WRNG•TAPE END and a tape reaches its end, a
call signal is output for 2 seconds from the CALL
OUT terminal.
ALARM•PROT (alarm protection) :
If any alarm recordings are present on the tape
and the tape stops, the indication “End” appears
on the fluorescent display and “TAPE END” on
screen. When CALL OUT is set to WRNG•TAPE
END, a call signal is output from the CALL OUT
terminal. If there is no alarm recording, the VCR
rewinds the tape to the beginning and resumes
the recording.
Go to page 9 for the VCR’s function when the tape reaches
its end during playback.
Setting Quasi-V-sync on or off (QUASI V-SYNC)
ON : Quasi-V-sync. signal is inserted to the video output
signal in the special effects playback ( page 16) or
normal playback in L18H-128H mode.
OFF : Quasi-V-sync. signal is not inserted.
Note
• Some multiplexers may require QUASI V-SYNC to be OFF
in order to work properly.
Setting the playback/recording colour mode (VIDEO MODE)
AUTO : The VCR automatically switches the circuits
according to type of the input/playback video
signal, colour or black & white.
B/W : Select for recording or playback in black & white.
COLOUR : Select for recording or playback in colour.
Setting the tape length (TAPE LENGTH)
E-180 : Select when using a E-180 tape.
E-240 : Select when using a E-240 tape.
Setting to sound buzzer during warning (BUZZER)
WRNG : The buzzer sounds when there is any
malfunction in the VCR.
WRNG•TAPE END : The buzzer sounds when there is any
malfunction in the VCR or the tape
reaches its end.
WRNG•REMAIN : The buzzer sounds when there is any
malfunction in the VCR or the tape has
approximately 3 minutes (at 3H mode) left.
OFF : The buzzer does not sound.
Note
• To stop the buzzer:
Press MENU button once. If <MAIN MENU> appears, press
MENU button again to exit the menu. When the VCR is
locked, press LOCK button to unlock the VCR, then the
buzzer stops.