Mitsubishi HS-1096E, Инструкция по установке и эксплуатации

Страница: 14 / 32

14
Advanced Functions
Note A point to notice
Info.
Supplementary information
01-01-’01 MON
00:00:00 X L24
<MAINTENANCE>
POWER LOSS LIST
ALARM LIST
ALL MENU INITIALISE
POWER LOSS LIST CLEAR
ALARM LIST CLEAR
<REPEAT REC TIMES> 0
<ELAPSED TIME> 0H
<POWER LOSS LIST>
01 31-01-’01 00:00
02
03
Synchronous Recording
A number of camera images can be mixed together through a
camera switcher and then recorded separately onto several
VCRs. A camera is assigned to each VCR with the VCR
recording only the camera image it has been assigned. This
allows recording without gaps.
If you have 3 VCRs, the video signal from 3 cameras can be
recorded separately by connecting the switcher as shown below:
1. Press MENU button.
• <MAIN MENU> appears.
2. Turn JOG to select REAR TERMINAL
and turn SHUTTLE to the right.
• <REAR TERMINAL> menu
appears.
3. Turn JOG to select REC IN and turn
SHUTTLE to the right.
Steps 4 to 7 on VCR1 only:
4. Turn JOG to select SERIES or REC-
START/STOP and turn SHUTTLE to
the right.
• If the recording start signal is
available on the switcher, select
SYNC REC.
5. Turn JOG to select CLOCK OUT and
turn SHUTTLE to the right.
6. Turn JOG to select T/L REC and turn
SHUTTLE to the right.
7. Turn JOG to select F and turn
SHUTTLE to the right.
Step 8 on all VCRs except VCR1:
8. Turn JOG to select SYNC REC and
turn SHUTTLE to the right.
9. Press MENU button.
• The day and present time appears on screen.
page 20 for synchronous recording connection
REC REC REC
REC REC REC
REC REC REC
CAMERA1 CAMERA2 CAMERA3 CAMERA1 CAMERA2 CAMERA3 CAMERA1 CAMERA2
V-SYNC
SWITCHER / switching
cameras
/ recording
start signal
VCR1 / recording
/ clock out
VCR2 / recording
/ clock out
VCR3 / recording
/ clock out
<MAIN MENU>
DISPLAY
TIMER PROGRAM
RECORDING SET UP
REAR TERMINAL
MAINTENANCE
<REAR TERMINAL>
CALL OUT WRNG•TAPE END
CLOCK OUT REC- 1
MODE OUT REC
REC IN SERIES
<REAR TERMINAL>
CALL OUT WRNG•TAPE END
CLOCK OUT REC- 1
MODE OUT REC
REC IN SERIES
<REAR TERMINAL>
CALL OUT WRNG•TAPE END
CLOCK OUT REC- 1
MODE OUT REC
REC IN REC-START/STOP
<REAR TERMINAL>
CALL OUT WRNG•TAPE END
CLOCK OUT REC- 1
MODE OUT REC
REC IN SERIES
<REAR TERMINAL>
CALL OUT WRNG•TAPE END
CLOCK OUT T/L REC- 1
MODE OUT REC
REC IN SERIES
<REAR TERMINAL>
CALL OUT WRNG•TAPE END
CLOCK OUT T/L REC- F
MODE OUT REC
REC IN SERIES
<REAR TERMINAL>
CALL OUT WRNG•TAPE END
CLOCK OUT REC- 1
MODE OUT REC
REC IN SYNC REC
Note
• The recording mode must be set to L18H, L24H, L30H or
L40H.
• The suitable number of VCRs and cameras to be connected
are shown below:
VCR Recording time mode
L18H, L24H
L30H, L40H 3
5
Number of cameras
Multiple of 3
Multiple of 5
Recording Techniques (Cont.)
Additional Features
Memory backup in case of power failure
This VCR includes a built-in backup memory, so the preset day
and present time will remain in memory even if there is a power
failure. However, if the power cord is disconnected for a long
period of time (2-3 months), the present time may not be
accurate. In this case, set the clock again.
Info.
• The battery is fully charged if the VCR’s power cord is
plugged into the outlet for 40 or more hours per week.
• If the battery is fully charged, even if the power cord is not
plugged in, the following settings will remain in memory for
up to 31 days:
–
The day and present time display
– Alarm list
– Power loss list
– Number of tape uses
– Counter display
– Recording/Playback mode
Note
• When ALARM REC DURATION of the RECORDING SET
UP menu is set to MAN1 or MAN2 and a power failure
occurs during the alarm recording, the VCR may not return
to the alarm recording mode when the power comes back
on.
After a power failure
If a power failure occurs during manual,
timer or alarm recording, the VCR will
return to the recording mode when the
power comes back on. The Power
Failure symbol (X) will be displayed for
about 1 minute on screen and the Power
Loss indicator ( ) will illuminate on the
fluorescent display when the power
comes back on. If a power failure occurs
while the VCR’s power is on, the VCR will
turn on by itself when the power comes back on.
Displaying/clearing the power loss list
Displaying the power loss list
The power failure start time is logged in the VCR’s Power Loss
List. To view the list, please follow the steps listed below.
1. Press MENU button.
• <MAIN MENU> appears.
2. Turn JOG to select MAINTENANCE
and turn SHUTTLE to the right.
• <MAINTENANCE> menu
appears.
3. Turn JOG to select POWER LOSS
LIST and turn SHUTTLE to the right.
• <POWER LOSS LIST> appears.
4. Press MENU button.
• The day and present time appears
on screen.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○