Mitsubishi FREQROL-SF, Руководство по устранению неисправностей

Страница: 191 / 219

Reference Setting and
Rewrite the
ta
T
When pressing the switch, data
can be rewritten.
At the time, the
address display LED blinks and
indicates that the data can be re-
written.
In addition, the data corresponding
to the address appears.
(Example)
When pressing the switch in the
state as shown in Figure 2,
appears.
When the switch is pres-
sed once again, appears.
(Figure 3).
When pressing the switch in
the state as shown in Figure 3,
appears. When pressing the
same switch once again, appears.
(Figure 2)
Select data using the
UP
and
switches.
To increment the data
value, press the
UP
s w i t c h .
To decrement the data value, press
the switch.
When pressing the switch once
again, data rewrite operation is
completed. At the time, the
address display LED steadily
lights rather than blinking.
(Note 1)
For the position
of the pushbutton
switch see
Appendix
"SF-CA card".
(Note 2)
It is possible to
press the pushbutton
switch only once
after all data write
operation is com-
pleted.