EN-5
Initial setting
To. load. information. on. the. projector. such. as. model. name. and. lamp. operating. time,. set. the. projector. data. in.
advance..Click.the.SETUP.button.on.the.ProjectorView.main.screen..The.Projector.Setup.screen.appears. Enter
.Enter.
data.according.to.the.description.of.each.setting.item..
(Note)
•. You.can’t.change.the.Projector.model,.Serial.number,.Operating.hours,.and.Lamp.hours..They.are.loaded.from.the.
projector.and.displayed.when.the.LAN.controlled.mode.of.Telnet.setting.is.set.to.ON..
•. The.entry.field.of.each.setting.item.contains.a.blank.character.by.default..When.setting.these.items,.delete.the.blank.
characters..
Each.setting.item.is.described.as.follows:.
ProjectorView (continued)
Projector.name*
Name.to.identify.the.projector.
Projector.model
Model.name.of.the.projector
Projector.location*
Location.of.the.projector
Serial.number
Serial.number.of.the.projector
SMTP.IP.address*
IP.address.of.the.SMTP.server.used.for.e-mail.transmission.(Example:.92.68.0.)
E-mail.address*
e-mail.address.to.receive.alert.notification.e-mail.(Example:[email protected]).(up.to.64.characters)
E-mail.host*
User-defined.string.displayed.at.the.Internet.header.of.e-mail.message.(Example:.user)
E-mail.from*
Sender.of.alert.notification.e-mail.(Example:[email protected])
Operating.hours
Cumulative.projector.operating.time
Lamp.hours
Cumulative.lamp.operating.time.calculated.based.on.that.LAMP.MODE.is.LOW.
Installation.date*
Date.when.the.projector.was.installed
Last.lamp.replacement.date* Date.when.the.lamp.was.last.replaced
Last.maintenance.date* Date.when.the.projector.was.last.maintenanced
Virtual.remote.enabled Display.or.hide.the.virtual.remote.controller.(Check.the.box.to.display.)
*.).For.data.entry,.use.single-byte.alphanumeric.characters.and.symbols.(+.-./.=.@.*._.!.?...,.;.:.#.$.%.&.(.).|.<.>.[.].{.}.".').
(Note)
When. the. “Standard”. lamp. mode. is. selected,. the. indicated. lamp. operating. time. may. exceed. the. indicated.
operating.time..
