36
••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
<TIMER PROGRAM SETTINGS> (continued)
■
PRE ALARM REC
The recording time for pre-alarm recording can be set (for
details concerning setting the pre-alarm recording time,
see page 33).
<TIMER PROGRAM SETTINGS>
SELECTED PATTERN P1-SET
HOLIDAY SETTING
REC MODE A NORMAL
&
ALARM-SET
REC MODE B NORMAL
&
ALARM-SET
REC MODE C NORMAL
&
ALARM-SET
REC MODE D NORMAL
&
ALARM-SET
ALARM REC DURATION 5S
>>PRE ALARM REC SHORT
For details concerning setting the pre-alarm re-
cording time, “Pre-alarm recording time table”,
see pages 83, 84.
1. Press the SET UP button
}
<SETTINGS>
}
Select “PRE
ALARM REC” in the <TIMER PROGRAM SETTINGS> screen.
Display the desired setting and confirm.
2. Turn the SHUTTLE ring counterclockwise or press the SET
UP button.
♦
Overlapping Timer settings
When Timer settings overlap, the unit will give priority to
the higher-numbered program.
Example 1
• Program 1 is set for 14:00 to 17:00 with the PPS to 10P.
• Program 2 is set for 15:00 to 16:00 with the PPS to 3P.
Under this condition, the unit will give priority to Program 2 for
the duration of the overlapping period, from 15:00 to 16:00.
The unit will operate as shown in the chart below.
INFORMATION
Recording will not be performed if there is an error in the setting. To prevent such errors for timer recording, this
unit notifies errors using methods shown below. If there is an error in the setting, take the necessary procedures
shown below.
Unit status
TIMER button flashes.
Series of short beeps
(beep-beep-beep)
will sound.
Timer recording is not
performed even when
the timer recording
time is reached.
1) The date/time is not set.
2) Timer reservation setting
has not been set to operate.
3) Program is currently being set.
1) "HDD REPEAT REC" in
<HDD SETTING> is
set to "OFF" or "STANDBY".
2) There is no HDD space left.
Description of error
Countermeasure
Page
1) Set the date/time.
2) Set the correct reservation.
3) Check the settings.
1), 2) Set "HDD REPEAT REC"
to "ON".
11, 12
34, 35
34, 35
37
14:00
15:00
16:00
17:00
14:00
15:00
16:00
17:00
Example 1)
In Program 1, recording is set for PPS
to 10P, from 14:00 to 17:00.
3P
In Program 2, recording is set for PPS
to 3P, from 15:00 to 16:00.
Actual recorded contents
10P
10P
Program 2
10P
3P
Program 1
Program 1
Example 2
• Program 1 is set for 14:00 to 17:00 with the PPS to 10P.
• Program 2 is set for 15:00 to 16:00 with the SKIP setting.
Again, the unit will give priority to Program 2 for the duration of
the overlapping period. As shown in the illustration below, the
unit will activate the Skip setting from 15:00 to 16:00.
14:00
15:00
16:00
17:00
14:00
15:00
16:00
17:00
10P
10P
NO
RECORDING!
Example 2)
SKIP
In Program 2, the SKIP setting is
entered for 15:00 to 16:00.
10P
Actual recorded contents
Program 2
Program 1
Program 1
In Program 1, recording is set for PPS
to 10P, from 14:00 to 17:00.
