21
6 Network Menu (DX-TL1600 only)
Remote control of the recorder(s) is possible using the DX-PC3
communication functions. For details on a general method of
connection, please refer to Section 12.2 (
Connection to Networks
).
Figure 6 Network menu
6.1 Connect Command
The Connect command in the Network menu allows you to establish a
connection to the recorder selected in the Recorder list window. This command does not
work if the Recorder list window is not displayed.
Note:
If connection to a recorder that has not yet started recording is attempted, operation
will halt in the middle of data acquisition. Before making a
connection, please be sure to confirm that the recorder contains some recorded data.
6.2 Disconnect Command
Connection to a recorder can be terminated using the Disconnect command
in the Network menu. This command does not
work when there is no active connection to a recorder.
6.3 Add recorder… Command
Clicking the Add recorder… command on the Network menu opens the Recorder list
window (Figures 6.3, 6.3.1, and 6.4). Using this window, you can add
or remove recorders as well as edit saved settings. DX-PC3 allows registry of
up to 100 terminals. Starting with the next session, the Recorder list window will
automatically be displayed when a registered recorder is present.
