Mitsubishi MOTORS PAJERO OBKE10E1, Руководство пользователя

Страница: 317 / 394

WARNING
l Mount the spare wheel with the valve
stem (I) facing outboard. If you cannot
see the valve stem, you have installed the
wheel backwards.
Operating the vehicle with the spare
wheel installed backwards can cause vehi-
cle damage and result in an accident.
9. Finger-tighten the wheel nuts. (Turn them
clockwise.)
Vehicles with steel wheels
Tighten the wheel nuts (tapered nuts) until
the tapered parts of the wheel nuts make
light contact with the seats of the wheel
holes and the wheel is not loose.
With a spare wheel, tighten the wheel nuts in
the same way.
Vehicles with steel wheels
Vehicles with aluminium wheels
Temporarily tighten the wheel nuts (flange
nuts) until their flange section comes in con-
tact with the wheel and it is no longer loose.
Vehicles with aluminium wheels
(aluminium wheels)
With a spare wheel, tighten the wheel nuts un-
til the tapered parts of the wheel nuts make
light contact with the seats of the wheel
holes and the wheel is not loose.
Spare wheel (steel wheels)
CAUTION
l Never apply oil to either the wheel bolts
or the nuts, or they will tighten too much.
NOTE
l Flange nuts can be temporarily used on the
spare wheel as shown in the illustration, but
return to the original wheel and tyre as soon
as possible.
l If all 4 aluminium wheels are changed to
steel wheels, use tapered nuts.
10. Put the notch (J) provided on the jack handle
end on the valve (K) of the jack.
For emergencies
6-13
6