80
No.
Message
Cause/Remedy
6
During Automatic RPG with
V.C.I.alone.
<Cause>
There is no ECU for requiring reprogramming
IG switch not positioned “ON”.
Main Harness not connected.
<Remedy>
1. Turn off the V.C.I. power.
2. Verify the connection of harness, and condition of harness itself.
3. Verify if the ECU for required reprogramming is installed.
4. Verify if the ECU can communicate with V.C.I.
5. Then redo the procedures.
7
During Automatic RPG with
V.C.I.alone.
<Cause>
There is no reprogramming data in memory card although ECU is
affected for reprogram.
<Remedy>
1. Press the V.C.I. “Enter” key and back to Main menu.
2. Turn off the V.C.I. and eject the memory card from V.C.I..
3. Insert the memory card into MUT-III (PC), and transfer the data
to the card. Then retry the procedure.
8
During automatic RPG or Load RPG
with V.C.I.alone.
<Cause>
Failure of data transfer from memory card to V.C.I..
<Remedy>
1. Press the V.C.I. “Enter” key and back to Main menu.
2. Retry Automatic RPG or Load RPG again.
10-7-2. Trouble of Reprogramming on CAN communication
N
o.
Message
Cause/Remedy
1
< Cause >
・
No reprogramming data exists for selected vehicle.
< Remedy >
・
Select vehicle type again.
2
< Cause >
・
Model specifying information (Model Year, Type, Class) is
insufficient.
< Remedy >
Select vehicle type again.
3
< Cause >
・
No CBF file exists in PC.
< Remedy >
・
Reinstall MUT-III.
ECU Reprogramming
No response from
vehicle ECU
CK VNxxxxx.rpg
In PC card
Load error
