manualshive.com logo in svg

Mitsubishi MOTORS Lancer Evolution 2009, Руководство пользователя

"Owner'S Manual для Mitsubishi MOTORS Lancer Evolution 2009 доступен для скачивания бесплатно на manualshive.com. Этот manual содержит все необходимые сведения о вашем автомобиле, чтобы обеспечить его надлежащее обслуживание и эксплуатацию. Скачайте его сейчас и будьте уверены в безопасности и производительности вашего автомобиля."

Поделиться
Скачать
background image

l

Pressing this button briefly during a call will
enable voice recognition and allow voice com-
mand input.

PICK-UP button

l

Press this button when an incoming call is re-
ceived to answer the telephone.

l

When  another  call  is  received  during  a  call,
press  this  button  to  put  the  first  caller  on
hold and talk to the new caller.

• In such circumstances, you can press the

button  briefly  to  switch  between  callers.
You will switch to the first caller and the
other caller will be put on hold.

• To establish a three-way call in such sit-

uations, press the SPEECH button to en-
ter  voice  recognition  mode  and  then  say
“Join call”.

HANG-UP button

l

Press this button when an incoming call is re-
ceived to refuse the call.

l

Press this button during a call to end the cur-
rent call.
When another call is on hold or there is an in-
coming call, you will switch to that call.

NOTE

l

When you press the SPEECH button to enter
voice recognition mode with a cellular phone
paired to the system, current information on
the  cellular  phone,  such  as  “remaining  bat-
tery  life,”  “signal  strength”  or  “roaming,”
will be displayed on the audio display.* (Re-
fer  to  “Pairing  a  cellular  phone”  on  page
5-51.)
*: Some cellular phones will not send this in-
formation to the Hands-free Bluetooth

®

 cel-

lular phone interface system with voice rec-
ognition.

l

Call waiting and three-way calls can be used
by the Hands-free Bluetooth

®

 cellular phone

interface system with voice recognition, only
when  those  services  can  be  used  with  your
cellular phone.

Voice recognition function

E00727300194

The  Hands-free  Bluetooth

®

  cellular  phone  inter-

face  system  with  voice  recognition  is  equipped
with a voice recognition function. Your voice will
be  recognised  by  a  microphone  in  the  room  lamp
(front), allowing you to make hands-free calls with
voice commands.
Voice recognition is possible for English, Spanish,
French, German and Italian. The factory setting is
English.
Some of the voice commands indicated below have
a number of alternative commands. For a table show-
ing the voice commands in each language and the
corresponding alternative commands, refer to “Com-
mands and Alternatives” on page 5-61.

NOTE

l

If  the  voice  command  that  you  say  differs
from  the  predefined  command  or  cannot  be
recognised due to ambient noise or some oth-
er reason, the Hands-free Bluetooth

®

 cellular

phone  interface  system  with  voice  recogni-
tion  will  ask  you  for  the  voice  command
again up to 3 times.

l

For  best  performance  and  further  reduction
of  ambient  noise,  the  vehicle  windows
should be closed while engaging the voice rec-
ognition function.

Selecting the Language

There are two ways to change the language.

NOTE

l

The  more  entries  that  are  registered  in  the
phone book, the longer it will take to change
the language.

Change the language using the “Language” com-
mand

1. Press the SPEECH button.
2. Say “Setup”.
3. Say “Language.”
4. The voice guide will say “Select a language:

English,  French,  Spanish,  Italian  or  Ger-
man.”  Say  the  desired  language.  (Example:
Say “English.”)

5. The voice guide will say “English (Spanish,

French,  German  or  Italian)  selected.  Is  this
correct?”  Say  “Yes”  to  start  the  language
changing process. Say “No” to return to Step
4.

6. When  the  voice  guide  says  “English  (Span-

ish, French, German or Italian) selected,” the
language changing process will be completed
and the system will return to the main menu.

For pleasant driving

5-48

5

Содержание Lancer Evolution 2009











































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для Lancer Evolution 2009

PAC I GM3 Instruction Manual preview
I GM3
Бренд: PAC Страницы: 15
AA Products X31 Instruction Manual preview
X31
Бренд: AA Products Страницы: 6
Federal Signal Corporation Vision SLR Quick Disconnect Manual preview
Vision SLR
Бренд: Federal Signal Corporation Страницы: 8
Federal Signal Corporation Vision SLR Supplement Manual preview
Vision SLR
Бренд: Federal Signal Corporation Страницы: 8
Calix M5T 187A Assembly Instructions preview
M5T 187A
Бренд: Calix Страницы: 5
Neuspeed 25.02.22.2 Installation Instructions preview
25.02.22.2
Бренд: Neuspeed Страницы: 2
Trailboss QTHD519L Fitting Instructions Manual preview
QTHD519L
Бренд: Trailboss Страницы: 8
Yescom YES5062 User Manual preview
YES5062
Бренд: Yescom Страницы: 4
Z Automotive Tazer DT User Manual preview
Tazer DT
Бренд: Z Automotive Страницы: 16
Chevrolet 1999 Malibu Owner'S Manual preview
1999 Malibu
Бренд: Chevrolet Страницы: 344
Prorack K692 Fitting Instructions Manual preview
K692
Бренд: Prorack Страницы: 15
Webasto CC4E Installation And Service Instructions Manual preview
CC4E
Бренд: Webasto Страницы: 34
Mini COOPER Owner'S Manual preview
COOPER
Бренд: Mini Страницы: 20
Right Weigh 221-SK Installation Manual preview
221-SK
Бренд: Right Weigh Страницы: 16
Ecco EC4210B-K Installation And Operation Instructions Manual preview
EC4210B-K
Бренд: Ecco Страницы: 9
Kuda 079020 Installation Instruction preview
079020
Бренд: Kuda Страницы: 2
cam 40103 AL Mounting Instructions preview
40103 AL
Бренд: cam Страницы: 6
Sagem MyCK100 User Manual preview
MyCK100
Бренд: Sagem Страницы: 10

Бренды по названию

Популярные бренды

Загрузить еще бренды