Mitsubishi MOTORS Eclipse 1997, Руководство по обслуживанию

Страница: 507 / 540

Radio, Tape Player, CD Player,
CHASSIS ELECTRICAL
Amplifier, Speaker and
Power button
Display
Memory select
Typical anti-theft code “5283”
TSB Revision
2. Return power supply for the radio, tape player and CD
player to the normal state.
3. Turn the ignition key to the “ACC” position.
4. Press the Power button, and ‘code” will be displayed
on the display.
5. Press No. through No. 4 memory select ‘buttons
and
set the anti-theft code indicated on the card.
NOTE
Pressing the memory select button increases the number
displayed.
. .
6. Press the tape player button; After a beep is heard,
the radio, tape and the operat-
ing state.
.
7. If the input anti-theft code does not agree with that in
memory, a beep sounds for two seconds. Err” is
played at that time and changes into
Then repeat
steps 5 and 6.
N O T E
(1) The anti-theft code can be set three ‘times at the
most.
(2) The seconds error is displayed as Err”; the third
trial fails, a beep sounds for five Err”
is displayed at that time and changes
(3) When setting is attempted three or more times, keep-
ing the ignition key in the “ACC” or position
for about one hour will automatically erase the
display.
the erasing, repeat step 3
and up.