Mitsubishi MOTORS Eclipse 1997, Руководство по обслуживанию

Страница: 506 / 540

Radio, Tape Player, CD Player,
CHASSIS ELECTRICAL and’
Security card
I
I
Anti-theft code
I
SERIAL NO.
PROCEDURE FOR INPUT OF
ANTI-THEFT SYSTEM
‘The radio, tape player and, CD does not in the
following states.
(1) Power supply to the radio, tape,, player CD
has been suspended for more
by removing the cable from the battery
the harness connectors.
(2) The power supply to radio, tape player and CD
has been suspended for more than one to
blown fuse or discharged battery-
(3) The radio, tape player and- CD player
‘has
been replaced.
If the radio, tape player and CD played do not
causes, input the anti-theft code, by procedure
to operate it. .
. .
.
1. Using any of the following confirm the an&theft
code.
(1) Read the anti-theft code indicated on the cards re-
tained by the user.
(2) If the anti-theft code is unknown owing to the user’s
loss of the cards.
1) Remove the radio, tape player and CD player
(Refer to
2) Read the serial No. shown on the name card
of the radio and tape player.
3) Look up the anti-theft code corresponding to the
serial number in the serial number-anti-theft code
table; or, make inquiries to Mitsubishi Motor Sales
of America, Inc.
(3) When the radio, tape player and CD player is replaced.
Read the anti-theft code on the cards attached to
the upper anti-theft of the replacement radio, tape
player and CD player.
NOTE
Deliver the cards (two) to the user.