Mitsubishi MOTORS ASX Series Скачать руководство пользователя страница 285

Страница: 285 / 514

NOTE

This switches in the order FM1, FM2, FM3,
DAB1, DAB2, DAB3, MW, and LW.

Select a Service

1. Hold down the

key or the

key.

Receives the lead services of the ensem-
bles that can be received.

2. Press the

key or the

key to select

the service.

key

(hold down)

Automatically receives low-
er lead services within en-
sembles that can be received.

key

(hold down)

Automatically receives high-
er lead services within en-
sembles that can be received.

key

Switches to lower services.

key

Switches to higher services.

NOTE

Going to the first service or last service
within the ensemble switches to the next en-
semble.

Register the Service

1. Tune in to the service to register.
2. Hold down any of the keys from the

1RPT key to the 6

key.

A “Beep” sounds, and the preset key is
registered.

NOTE

If a preset key that already has a service reg-
istered is selected, then this is overwritten
with the new preset.

Pressing the preset key will select the previ-
ously registered service.

Search for a Service

Search for ensembles and services that can be
received.

1. Turn the

/SEL key to select the en-

semble.

2. Press the /SEL key.

The service name within the selected en-
semble is displayed.

3. Turn the

/SEL key to select the serv-

ice.

4. Press the /SEL key.

Receive the selected service.

NOTE

If the text information for the service name
cannot be obtained, then nothing is dis-
played.

If there is no operation for 10 seconds, then
service search mode will be cancelled.

PTY Search

Select PTY (program content), and automati-
cally scan for services.

1. Press the PTY/SCAN key.

This switches to the PTY selection
mode.

2. Turn the /SEL key to select PTY.
3. Press the

key or

key.

This starts PTY search.

key

Lower PTY search starts.

key

Higher PTY search starts.

NOTE

When selecting PTY, press any of the keys
from the 1RPT key to the 6

key to

switch to the PTY registered as a preset.

When selecting PTY, select the PTY to reg-
ister, and hold down any of the keys from
the 1RPT key to the 6

key to register the

PTY as a preset.

Listen to DAB*

7-25

OGAE18E1

For pleasant driving

Содержание ASX Series



































































































































































































































































































































































































































































































































Результаты поиска

Содержание ASX Series

Отзывы:

Похожие инструкции для ASX Series

Бренды по названию

Популярные бренды

Mitsubishi MOTORS ASX Series, Руководство пользователя

Результаты поиска

Содержание ASX Series

Отзывы:

Похожие инструкции для ASX Series

Бренды по названию

Популярные бренды