manualshive.com logo in svg

Mitsubishi MOTORS ASX Series, Руководство пользователя

"Серия ASX от Mitsubishi MOTORS - это удивительный выбор для любителей кроссоверов. Владельцы могут загрузить бесплатное Руководство пользователя для получения полной информации об управлении и обслуживании своего автомобиля. Загрузите его с manualshive.com сейчас и ознакомьтесь с функциональностью ASX."

Поделиться
Скачать
background image

Foreword

E09200107208

Thank you for selecting an ASX as your new vehicle.
 
This owner’s manual will add to your understanding and full enjoyment of
the many fine features of this vehicle.
It contains information prepared to acquaint you with the proper way to oper-
ate and maintain your vehicle for the utmost in driving pleasure.
 
MITSUBISHI MOTORS Europe B.V. reserves the right to make changes in
design  and  specifications  and/or  to  make  additions  to  or  improvements  in
this product without obligation to install them on products previously manu-
factured.
It  is  an  absolute  requirement  for  the  driver  to  strictly  observe  all  laws  and
regulations concerning vehicles.
 
This owner’s manual has been written in compliance with such laws and reg-
ulations,  but  some  of  the  contents  may  become  contradictory  with  later
amendment of the laws and regulations.
 
Please leave this owner’s manual in this vehicle at time of resale. The next
owner  will  appreciate  having  access  to  the  information  contained  in  this
owner’s manual.
 
Repairs to your vehicle:
Vehicles in the warranty period:
All warranty repairs must be carried out by a MITSUBISHI MOTORS Au-
thorized Service Point.
 
Vehicles outside the warranty period:
Where the vehicle is repaired is at the discretion of the owner.

Throughout  this  owner’s  manual  the  words 

WARNING

  and 

CAUTION

appear.
These serve as reminders to be especially careful. Failure to follow instruc-
tions could result in personal injury or damage to your vehicle.

WARNING

Indicates  a  strong  possibility  of  severe  personal  injury  or  death  if  in-
structions are not followed.

 

CAUTION

Means hazards or unsafe practices that could cause minor personal in-
jury or damage to your vehicle.

NOTE

Gives helpful information.

You will see another important symbol:

*: indicates optional equipment.

It  may  differ  according  to  the  sales  classification;  refer  to  the  sales  cata-
logue.
Abbreviations used in this owner’s manual:

LHD: Left-Hand Drive

M/T: Manual Transmission

RHD: Right-Hand Drive

A/T: Automatic Transmission

 

CVT: 

Continuously 

Variable

Transmission

The symbol used on the vehicles:

: See owner’s manual

Information for station service

E09300104660

Fuel

Capacity

Petrol-powered vehicles

2WD models

58 litres

*1

63 litres

*2

4WD models

60 litres

Diesel-powered vehicles

 

60 litres

Recommended
fuel

Petrol-powered vehicles

Unleaded petrol octane number (EN228)

1600 models, 1800 models: 95 RON or higher
2000 models: 90 RON or higher

Diesel-powered vehicles

Cetane number (EN590): 51 or higher

Refer to the “General information” section for the fuel selection.

Engine oil

Refer to the “Maintenance” section for the selection of engine oil.

Tyre inflation pressure

Refer to the “Maintenance” section for the tyre inflation pressure.

*1

: For vehicles with vehicle identification numbers that begin with “4”

*2

: For vehicles with vehicle identification numbers that begin with “J”

CAUTION

l

Diesel-powered vehicles are designed to use only diesel fuel that meets the EN 590 standard.
Use of any other type of diesel fuel can adversely affect the engine.

NOTE

l

For the location of the vehicle identification number, refer to “Vehicle identification number” on page 11-02.

© 2017 Mitsubishi Motors Corporation

18

OGAE18E1

BLO-17-000482

Содержание ASX Series



































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для ASX Series

Cadillac 2011 CTS COUPE Personalization Manual preview
2011 CTS COUPE
Бренд: Cadillac Страницы: 20
Cadillac 2011 CTS COUPE Specifications preview
2011 CTS COUPE
Бренд: Cadillac Страницы: 2
Cadillac 2009 CTS Owner'S Manual preview
2009 CTS
Бренд: Cadillac Страницы: 494
Cadillac 2008 Escalade Owner'S Manual preview
2008 Escalade
Бренд: Cadillac Страницы: 500
Cadillac 2006 Escalade Warranty And Owner Assistance Information preview
2006 Escalade
Бренд: Cadillac Страницы: 40
Cadillac 2004 DeVille Owner'S Manual preview
2004 DeVille
Бренд: Cadillac Страницы: 432
Cadillac 1997 Catera Owner'S Manual preview
1997 Catera
Бренд: Cadillac Страницы: 338
Cadillac 2009 STS Get To Know preview
2009 STS
Бренд: Cadillac Страницы: 20
Cadillac 2005 STS Owner'S Manual preview
2005 STS
Бренд: Cadillac Страницы: 438
KAP AUDI 4G HIGHEND Manual preview
AUDI 4G HIGHEND
Бренд: KAP Страницы: 20
Cadillac ESCALADE FAMILY - SPECIFICATIONS 2011 Specifications preview
ESCALADE FAMILY - SPECIFICATIONS 2011
Бренд: Cadillac Страницы: 1
Subaru SPLASH GUARD Installation Manual preview
SPLASH GUARD
Бренд: Subaru Страницы: 3
Brodit ProClip 853660 Manual preview
ProClip 853660
Бренд: Brodit Страницы: 2
Power Fist 8985988 Manual preview
8985988
Бренд: Power Fist Страницы: 12
EAL EUFAB 16491 Operating Instructions Manual preview
EUFAB 16491
Бренд: EAL Страницы: 7
Mazda 2007 MazdaSpeed6 Specification preview
2007 MazdaSpeed6
Бренд: Mazda Страницы: 12
HAUL MASTER 41782 Assembly And Operating Instructions Manual preview
41782
Бренд: HAUL MASTER Страницы: 8
BMW M5 2014 Service And Warranty Information preview
M5 2014
Бренд: BMW Страницы: 38

Бренды по названию

Популярные бренды

Загрузить еще бренды