Mitsubishi MOTORS ASX Series, Руководство пользователя

Страница: 215 / 514

WARNING
l
When attempting to rock your vehicle out
of a stuck position, be sure that the area
around the vehicle is clear of people and
physical objects. The rocking motion may
cause the vehicle to suddenly launch for-
ward or backward, causing injury or
damage to nearby people or objects.
NOTE
l Avoid sudden braking, sudden acceleration
and sharp turning; such operations could re-
sult in the vehicle becoming stuck.
l If the vehicle becomes stuck in sandy or
muddy roads, it can often be moved with a
rocking motion. Move the gearshift lever al-
ternately between the 1
st
and “R” (Reverse)
positions (M/T), the “D” (DRIVE) and “R”
(REVERSE) positions (A/T or CVT), while
pressing lightly on the accelerator pedal.
l
Driving on rough roads can cause rust on the
vehicle; wash the vehicle thoroughly as soon
as possible after such use.
Climbing/descending sharp
grades
Your vehicle may not provide sufficient hill
climbing ability and engine braking on steep
slopes. Avoid driving on steep slopes even
though the vehicle is a 4-wheel drive vehicle.
Driving through water
E00618900106
If the electrical circuits become wet, further
operation of the vehicle will be impossible;
therefore, avoid driving through water unless
absolutely necessary. If driving through wa-
ter is unavoidable, use the following proce-
dure:
Check the depth of the water and the terrain
before attempting to drive through it. Drive
slowly to avoid creating excessive water
splashing.
CAUTION
l Never drive through water that is deep
enough to cover wheel hubs, axles or ex-
haust pipe. Do not change the gearshift lever
position (M/T) or the selector lever position
(A/T or CVT) while driving through water.
Frequent driving through water can adverse-
ly affect the life span of the vehicle; we rec-
ommend you to take the necessary measures
to prepare, inspect, and repair the vehicle.
l
After driving through water, apply the
brakes to be sure they are functioning prop-
erly. If the brakes are wet and not function-
ing properly, dry them out by driving slowly
while lightly depressing the brake pedal. In-
spect each part of the vehicle carefully.
Inspection and maintenance
following rough road
operation
E00606700338
After operating the vehicle in rough road
conditions, be sure to perform the following
inspection and maintenance procedures:
l Check that the vehicle has not been dam-
aged by rocks, gravel, etc.
l Carefully wash the vehicle with water.
Drive the vehicle slowly while lightly
depressing the brake pedal in order to
dry out the brakes. If the brakes still do
not function properly, we recommend
you to have the brakes checked as soon
as possible.
l Remove the insects, dried grass, etc.
clogging the radiator core.
l
After driving through water, check the
engine, transmission and differential oil.
If the oil or grease is milky or cloudy be-
cause of water contamination, it must be
replaced with new oil or grease.
l
Check the inside of the vehicle. If water
entry is found, dry the carpet etc.
l Inspect the headlamps, If the headlamp
bulb is flooded with water, we recom-
mend you to have it drained.
Inspection and maintenance following rough road operation
6-43
OGAE18E1
Starting and driving
6