manualshive.com logo in svg

Mitsubishi Heavy Industries SRK10YSA-W, Руководство пользователя, Страница: 31 / 33

Поделиться
Скачать
Mitsubishi Heavy Industries SRK10YSA-W Скачать руководство пользователя страница 31

– 30 –

Notice

Air is not blown out when starting the DRY operation.

(RUN light is on)

The indoor fan may stop to prevent re-evaporation of 
dehumidified moisture and to save energy.

Airflow

Noise

Others

You hear a slight gurgling sound.

This is caused by refrigerant moving within the unit.

You hear a slight cracking sound. 

This is caused by heat expansion or contraction.

You hear a hissing or clicking sound.

This is caused by the operation of the refrigerant control 
valves or electric components.

Whistling noise is heard from the outdoor unit.

This means that the rotation speed of the compressor is 
increasing or decreasing.

The unit does not restart immediately after you have 
stopped it.

(RUN light is on)

Restart is blocked for 3 minutes after you have stopped the 
operation to protect the unit.

The 3 minutes protection timer in the microcomputer 
automatically starts it up again.

Some steam releases during COOL operation.

This may occur if the room’s temperature and humidity are 
very high. It disappears as soon as the temperature and 
humidity decrease.
Close all windows and doors to prevent outside humidity from 
entering.

There is a slight smell.

Air blown out during operation may smell. This is caused by 
tobacco or cosmetics adhering to the unit.

After a power cut, the unit does not restart even if power 
has been restored.

If the auto restart function is not set, the unit will not restart 
automatically. Use the remote control to start the operation 
again.

Remote control signals are not received.

Remote control signals may not be received if the signal 
receiver on the air-conditioner is exposed to direct sunlight or 
other bright light.
If so, block the sunlight or reduce the other light.

Moisture may form on the air outlet grills.

If the unit is operated for a long time in high humidity, moisture 
may form on the air outlet grills and start dripping.

Fan will not stop immediately after unit operation is 
stopped.

Indoor fan 

:  Fan will not stop after 2 hours if set to SELF 

CLEAN operation.

Outdoor fan  :  Fan will not stop about a 1 minute period in 

order to protect the unit.

RUN light stays on even though operation was stopped.

The RUN light illuminates during SELF CLEAN operation.
Run light will turn off when SELF CLEAN operation ends.

RLF012A104B_EN.indd   30

RLF012A104B_EN.indd   30

9/12/2017   16:08:43

9/12/2017   16:08:43

Содержание SRK10YSA-W


































Отзывы:

Нет отзывов