manualshive.com logo in svg

Mitsubishi Heavy Industries SRK10YSA-W, Руководство пользователя, Страница: 16 / 33

Поделиться
Скачать
Mitsubishi Heavy Industries SRK10YSA-W Скачать руководство пользователя страница 16

– 15 –

Airflow direction adjustment

■

  Up/down direction can be adjusted with the AIR FLOW U/D (UP/DOWN) button on the remote control. Every time you press this button, 

the mode changes as follows:

 

Change on AIR FLOW (UP/DOWN) mode.

■

  Left/right direction can be adjusted with the AIR FLOW L/R (LEFT/RIGHT) button on the remote control. Every time you press this 

button, the mode changes as follows: 

 

Change on AIR FLOW (LEFT/RIGHT) mode.

(Swing)

(Flap stopped)

(Louver stopped)

(Swing)

•

  The actual position of the flap and louver may differ from the display shown.

NOTE

Memory flap (Flap or louver stopped)

When you press the AIR FLOW (U/D or L/R) button once while the flap or louver is operating, it stops swinging at the position. 
Since this angle is memorized in the microcomputer, the flap or louver will automatically be set at this angle when the next 
operation is started.

 WARNING

•

  Do not expose directly to airflow from the air-conditioner for a long time.

 CAUTION

•

  When in COOL or DRY operation, do not operate for a long period with the 

airflow blowing straight down. Otherwise, condensation may appear on the 
outlet grill and drip down.

•

  Do not try to adjust the flaps and louvers by hand, as the control angle may 

change or the flap or louver may not be closed completely.

(Horizontal 

blowing)

COOL, DRY

•

  Recommended angle of the flap when 

stopping

3D AUTO operation

■

 

Fan speed and airflow direction are automatically controlled, allowing the entire room to be efficiently air-conditioned.

Press the ON/OFF button.

Press the 3D AUTO button.

Each time the 3D AUTO button is pressed, the display is switched in the 
order of:

1
2

(Normal operation)

(3D AUTO) 

No display

•

  3D AUTO operation is canceled when you switch the operation mode.

•

  If 3D AUTO operation is canceled then the airflow direction changes to that 

used before 3D AUTO was set.

•

  3D AUTO operation can be set in COOL operation mode only.

NOTE

Releasing procedure

Press the 3D AUTO button to turn off the 3D AUTO display.

RLF012A104B_EN.indd   15

RLF012A104B_EN.indd   15

9/12/2017   16:08:39

9/12/2017   16:08:39

Содержание SRK10YSA-W


































Отзывы:

Нет отзывов