
– 28 –
At the end of the season
At the beginning of the season
Stop the unit and turn off the power source.
The unit consumes approx. 4W even when the unit is not operating.
Turning off the power source will help saving energy consumption and cost.
Ensure that the earth wiring is not snapped nor
disconnected.
Make sure that there are no obstacles blocking
the airflow around the air intake and outlet
openings of the indoor and outdoor units.
NOTE
Cooling is affected by an air filter clogged up with dust etc., and the operation noise becomes louder. It may also
use extra electricity. Please clean the air filter at appropriate intervals.
1
2
Remove batteries from the remote control.
Clean both the indoor and outdoor units.
Clean and reinstall the air filters.
Perform the fan operation for 2 to 3 hours.
Dry the inside of the unit.
3
4
5
Make sure that there is no corrosion or rust on
the base frame of the outdoor unit.
Insert batteries in the remote control.
Turn on the power source.
3
2
1
4
5
Installing, inspecting and replacing the air-cleaning filter
1. Open the air inlet panel and remove the air filters.
Page 27
2. Remove the filter holders, with the air-cleaning filter installed in the holders, from the
air-conditioner.
3. Remove the natural enzyme filter from filter holder and inspect the filter. Use a
vacuum cleaner to remove any dust or dirt from the natural enzyme filter. Replace
the natural enzyme filter if it cannot be cleaned or if it has been for about 1 year.
(The natural enzyme filter should be replaced after about 1 year of use. However,
the actual replacement period may vary depending on the conditions in which the
filter is used.)
Remove the photocatalytic washable deodorizing filter (orange) from the filter holder
and inspect the filter. Periodically, remove any dust or dirt from the photocatalytic
washable deodorizing filter. If the photocatalytic washable deodorizing filter is
particularly dirty, it may be washed with water. However, the filter is fragile so be sure
to wash it installed in the filter holder to avoid damaging it. After washing the filter,
place it in sunlight to dry. Placing the filter in sunlight restores the deodorizing effect.
(Do not dispose of the filter holders. They are reusable. )
4. Install the air-cleaning filter in the filter holders, and then install the filter
holders in the air-conditioner.
5. Install the air filters and close the air inlet panel.
Page 27
NOTE
•
The natural enzyme filter and the photocatalytic washable deodorizing filter
may be installed on either the right or left side of the air-conditioner.
•
Do not expose natural enzyme filters to direct sunlight for an extended period. The bacteriolytic
effect will be lost.
•
The heat exchanger may injure your fingers.
•
Stand firmly on a stepladder or other stable object when removing the inlet panel and filters.
Item
Feature
Color
For replacing the air-cleaning filter, contact your dealer.
By using the work of oxygen, mold and bacteria on the
fi lter are destroyed and the room air is kept clean.
Sources of odors on the filter are broken up, resulting in
a deodorizing effect.
Photocatalytic washable
deodorizing filter
Orange
Natural enzyme fi lter
Green
CAUTION
Filter holder
Filter
RLF012A104B_EN.indd 28
RLF012A104B_EN.indd 28
9/12/2017 16:08:43
9/12/2017 16:08:43