Mitsubishi Heavy Industries RM-CGW-E1, Руководство по установке, Страница: 52 / 54

ISTZ220019A
52
4. Troubleshooting
The PC cannot be connected to the
gateway.  Check the IP address setting of the PC.
If the gateway's IP address is set to the factory default
(192.168.0.110), make the PC setting as shown below and you
should be able to connect the PC to the gateway.
<IP address>: 192.168.0.100
<Subnet mask>: 255.255.255.0
 Check that the LAN cable between the gateway and PC is
correctly connected.

If you do not know the gateway's IP address, refer to "How to
initialize the gateway's IP address" and initialize the IP address.
The latest data reception time of
the gateway is not updated on the
M-ACCESS server side.  Check that each unit is correctly connected.
 The gateway network settings may be incorrect.
Check the setting status again according to the installation
procedure for each method.

Access may be restricted in the router or firewall settings.