Mitsubishi Heavy Industries eco touch RC-EXC3A Скачать руководство пользователя страница 45

Страница: 45 / 50

−43−

−42−

On the TOP screen, set the desired operation mode, set temp, fan speed, and flap direction.

Tap the Menu button on the TOP screen and select Useful functions

⇒

Favorite setting .

The administrator password input screen is displayed.
Enter the administrator password.

■

You cannot register the favorite settings during high power and energy-saving operations.

The save location selection screen for favorite settings is displayed.

Select the save location.
If there is any data that was previously saved, that data will be overwritten.

Registering favorite settings

Operation mode, set temp, fan speed, fan direction can be registered as Favorite set 1 and Favorite set 2.

Allocating these settings to the

and F2 switches allows you to perform operations with these registered settings with a single tap of the button.

Refer to the F1/F2 function setting on how to set the F1

and F2 switches.

Favorite set 2

Favorite set 1

Favorite setting

Back

Saving current state of operation

Saving where?

When you press the

( F2 ) switch, the operation mode, set temp, fan speed, flap direction

registered to Favorite set 1 or

Favorite set 2 will be enabled.

■

Operation will start even if you press the

(

) switch while the unit is stopped.

■

You can change the operation mode, set temp, fan speed, flap direction after the operation has started with the favorite setting operation.

■

Following power on, the unit starts to operate initially with the following settings for both Favorite set 1 and Favorite set 2.

Operation mode

...Cooling

Set temp

...28°C

Fan speed

...3-speed

Flap direction

...Position 2

＊

When an FDK with a left/right flap is connected

Left/right flap direction ...Center
3D AUTO

...Disabled

■

When Change set temp, Change operation mode, Change flap direction, Change fan speed are restricted by the Permission/Prohibition setting,

restricted items will not be reflected to the favorite setting operation.

Favorite setting operation

You can start an operation with the operation mode, set temp, fan speed, flap direction registered to Favorite set 1 and Favorite set 2.

Settings for the operation mode, set temp, fan speed, flap direction can be registered from Favorite setting on the menu.
Favorite setting operation must be set to the

or F2 switch.

Direction

Cooling

：

(Mon)

F1: Favorite set 1

F2: Favorite set 2

Timer

In operation for running.

Set temp

Tap the Menu button on the TOP screen and select Useful functions

⇒

Silent mode control .

The administrator password input screen is displayed.
Enter the administrator password.

The Silent mode control (Start/End) screen is displayed.

Tap the Start button to start the silent mode control.
To terminate the silent mode control, tap the End button.

During silent mode control, “Outdoor unit silent mode control ON” will be displayed on the message display.

■

Silent mode control will not be disabled even if you press the

Run/Stop

switch.

■

When the sub R/C is set, the silent mode control cannot be used.

■

During silent mode control, operation with maximum capacity is not allowed.

Silent mode control

The OU is controlled with priority on quietness. You can start/stop the silent mode control.

【

Starting control with

button

】

PJZ012A172_EN.indd 43

2018/05/09 15:04:31

Содержание eco touch RC-EXC3A



















































Результаты поиска

Содержание eco touch RC-EXC3A

Отзывы:

Похожие инструкции для eco touch RC-EXC3A

Бренды по названию

Популярные бренды

Mitsubishi Heavy Industries eco touch RC-EXC3A, Быстрая справка

Результаты поиска

Содержание eco touch RC-EXC3A

Отзывы:

Похожие инструкции для eco touch RC-EXC3A

Бренды по названию

Популярные бренды