EN-61
Troubleshooting (continued)
Problem
Solution
FOCUS/ZOOM
doesn’t work.
Lens shift doesn’t work.
• Check that LENS LOCK in the INSTALLATION menu isn’t ON. (See page 33.)
If the following problem occurs after the lamp is replaced, check the following first.
Problem
Solution
The projector does not
turn on.
• Fit the lamp cover securely. (See page 54.)
• Reset the lamp operating time. (See page 54.)
The STATUS indicator
illuminates red.
• Reset the lamp operating time. (See page 54.)
Kensington Lock
This projector has a Kensington Security Standard connector for use with Kensington MicroSaver Security System.
Refer to the information that came with the Kensington System for instructions on how to use it to secure the
projector. Please contact Kensington Technology Group below.
Kensington Technology Group
2855 Campus Drive
San Mateo, CA 94403, U.S.A.
Phone: +1- (650)572-2700
Fax: +1- (650)572-9675
