EN-47
Initialization of Network Settings
(See page 31 for menu setting.)
1. Display the NETWORK menu.
2. Press the
or
button to select NETWORK
RESET.
NETWORK RESET
OK
3. Press the ENTER button.
• Confirmation dialog appears.
4. Press the ENTER button again, and the Network
Settings can be initialized (except for IP CONFIG).
• To cancel the initialization, press the MENU
button.
• Alert E-mail setting is also reset. For details
about Alert E-mail function, see “LAN control
UTILITY operation manual” in the CD-ROM.
• It may take some time to reflect the settings.
How to Use Network Function
• When connecting a computer and projector with
LAN, configure the both IP Addresses in the
same network group.
If connecting in different network group, be sure
to use a router. As for the settings of a router, ask
the network administrator.
• Configure the IP CONFIG correctly. If the settings
are not correct, the communication may be
unavailable. For the detail, consult the network
administrator.
• Depending on the settings of standby mode of
the projector, LAN function may be unavailable.
See page 33 for the detail of standby mode.
Initial network settings (continued)
Glossary
For more detail of the glossary below, refer to the
technical book that is commercially available.
Term
Description
DHCP
Abbreviation for Dynamic Host
Configuration Protocol. This
protocol automatically assigns IP
Address to networked devices.
IP Address
Numerical address to identify
networked computers.
Subnet Mask
A numeric value to define the
number of bits used for a network
address of a divided network (or
subnet) in an IP Address.
Default Gateway
A server (or router) to communicate
across networks (subnets) that are
divided by Subnet Mask.
MAC Address
Abbreviation for Media Access
Control Address. MAC Address is a
unique ID number assigned to each
network adapter. And this is based
on which data are sent and received
between network adapters.
