EN-3
EN
GL
IS
H
WARNING
Use the attached specified power supply cord. If you
use another power supply cord, it may cause interfer-
ence with radio and television reception.
Use the attached RGB cable with this equipment so
as to keep interference within the limit of an FCC
Class B device.
This apparatus must be grounded.
DO NOT LOOK DIRECTLY INTO THE LENS
WHEN THE PROJECTOR IS IN THE
POWER ON MODE.
CAUTION
Not for use in a computer room as defined in the
Standard for the Protection of Electronic Computer/
Data Processing Equipment, ANSI/NFPA 75.
The attached power cord is to be used exclusively for
this product. Never use it for other products.
When using the projector in Europe:
COMPLIANCE NOTICE
This Projector complies with the requirements of the
EC Directive 89/336/EEC "EMC Directive" as
amended by Directive 92/31/EEC and
93/68/EEC, and 2006/95/EC "Low Voltage Directive".
The electro-magnetic susceptibility has been chosen
at a level that gains proper operation in residential
areas, on business and light industrial premises and
on small-scale enterprises, inside as well as outside
of the buildings. All places of operation are charac-
terized by their connection to the public low voltage
power supply system.
WARNING
Use the attached RGB cable with this equipment so
as to keep interference within the limits of an
EN55022 Class B device.
Please follow WARNING instructions.
WARNING
• The lens cap is for protecting the lens. If you leave
the lens cap on the lens with the projector turned
on, it may be deformed because of heat build-up.
Remove the lens cap when you turn on the projec-
tor.
• One of power cords for the U.S., Europe and U.K.
is provided appropriately.
• This projector uses the power plug of three-pin
grounding type. Do not remove the grounding pin
from the power plug. If the power plug doesn’t fit
your wall outlet, ask an electrician to change the
wall outlet.
• In case that the power cord for the U.S. is pro-
vided with this projector, never connect this cord
to any outlet or power supply using other voltages
or frequencies than rated. If you want to use a
power supply using other voltage than rated, pre-
pare an appropriate power cord separately.
• Use 100-240 V AC 50/60 Hz to prevent fire or
electric shock.
• Do not place any objects on the power cord or do
not place the projector near heat sources to pre-
vent damage to the power cord. If the power cord
should be damaged, contact your dealer for
replacement because it may cause fire or electric
shock.
• Do not modify or alter the power cord. If the power
cord is modified or altered, it may cause fire or
electric shock.
Note:
This symbol mark is
for EU countries only.
This symbol mark is
according to the directive
2002/96/EC Article 10
Information for users and
Annex IV.
Your MITSUBISHI ELECTRIC product is designed and
manufactured with high quality materials and components
which can be recycled and reused.
This symbol means that electrical and electronic equip-
ment, at their end-of-life, should be disposed of sepa-
rately from your household waste.
Please, dispose of this equipment at your local commu-
nity waste collection/recycling centre.
In the European Union there are separate collection sys-
tems for used electrical and electronic product.
Please, help us to conserve the environment we live in!
