EN-11
EN
GL
IS
H
Remote Control
Remote control description
1.
Power button
for more information)
Turns the projector on or off.
When the projector is in standby, press once to turn the projector on.
When the projector is on, press twice to switch the projector to standby.
2.
Freeze button
The image is frozen when
Freeze
is pressed. An icon "
" will display in the lower
right corner of the screen. To release the function, press
Freeze
again or the
Source
button.
3.
5
Up,
6
Down buttons (Refer to
"Remote paging operations" on page 27
for
more information.)
4.
3
Left,
4
Right buttons
When the on-screen menu is activated, the Up/Down/Left/Right buttons are used as
directional arrows to select the desired menu items and to make adjustments.
5.
MENU button (Refer to
for more information.)
Turns on the On-Screen Display (OSD) menu.
6.
Keystone
buttons (Refer to
"Correcting keystone" on page 25
for more
information.)
Manually corrects distorted images resulting from an angled projection.
7.
Page Up and Down buttons
You can operate your display software program (on a connected PC) which responds to
page up/down commands (like Microsoft PowerPoint) by p
ressing these buttons.
8.
AUTO button (Refer to
"Auto-adjusting the image" on page 25
for more
information.)
Automatically determines the best picture settings for the displayed image.
9.
"Switching input signal" on page 27
for more infor-
mation)
Sequentially selects input sources. (RGB/YPbPr-> Video-> S-Video)
1
2
3
4
5
3
6
7
8
9
10
11
