Mitsubishi Electric XD90U, Руководство пользователя

Страница: 10 / 49

EN-10
When the projector is on, press twice to switch the projector to standby.
6. Keystone /
3
Left button (Refer to "Correcting keystone" on page 25 and
"Using the menus" on page 30 for more information)
Press this button to correct keystoning at the top of the projected image.
When the on-screen menu is activated, press this button to move the selection focus
left or make adjustments.
7. SOURCE button (Refer to "Switching input signal" on page 27 for more infor-
mation)
Switches sequentially through input sources. (RGB/YPbPr, Video or S-Video).
8. MENU /
6
Down button (Refer to "Using the menus" on page 30 for more infor-
mation)
Turns on the On-Screen Display (OSD) menu.
When the on-screen menu is activated, press this button to move the selection focus
down.
9. Focus ring (Refer to "Fine-tuning the image size and clarity" on page 25 for
more information)
Adjusts the focus of the projected image.
10. LAMP indicator light (Refer to "Illustration" on page 42 for more information)
Lights up or flashes when the projector lamp has developed a problem.
11. MODE button (Refer to "Selecting an application mode" on page 26 for more
information)
Selects one of the application modes.
12. Keystone /
4
Right button (Refer to "Correcting keystone" on page 25 and
"Using the menus" on page 30 for more information)
Press this button to correct keystoning at the bottom of the projected image.
When the on-screen menu is activated, press this button to move the selection focus
right or make adjustments.
13. AUTO button (Refer to "Auto-adjusting the image" on page 25 for more infor-
mation)
Press this button to let the projector automatically determine the best picture timings
for the projected image.