64
PC application using the IRASTRIUM software. After that, you must associate these
access points to the specific GPRS oriented remote accesses defined on the PC by
the IRASTRIUM software (The IRASTRIUM software can be found on the CD-ROM
accompanying your Sirius).
Defined access points for use under WAP™ are accessible in the
GPRS access
points
menu. Access points for use with PC are accessible and changeable via the
IRASTRIUM application. Your Sirius must be connected to the COM port of your PC
to this effect.
Please note that in all cases, the relative parameters to access points are always
stocked in your Sirius mobile (and not on your PC).
GPRS settings on your Sirius
Access points allow access to WAP™ sites from the WAP™ navigator within
your Sirius exclusively.
Firstly contact your operator to get the complete
URL address
for the ac-
cess point, together with your
user name
and your
user password
. It is
also possible that your Sirius is pre-programmed with access points data
defined by your network operator. Generally, these access points are
locked and even sometimes invisible.
To...
Create or modify a WAP™ access point: refer to page 65.
Associate an access point to a WAP™ profile: refer to pages 65 and 66.
Create/modify access points for PC application: refer to the IRASTRIUM
user guide.
Associate remote access connections to access points: refer to the IRASTRI-
UM user guide.