manualshive.com logo in svg

Mitsubishi Electric Trium SIRIUS, Руководство пользователя

Поделиться
Скачать
Mitsubishi Electric Trium SIRIUS Скачать руководство пользователя страница 56

56

either turn off, or, if 'on' at the time of the alarm, will revert back to the 
normal standby display.

To turn off the alarm,

1. Until acknowledged the alarm will ring for 1 minute. Pressing any key (other than the Valid 

softkey) will stop the alarm sounding but not switch off the alarm, it will be repeated 3 minutes 
later. If the Valid softkey is not pressed after the 3rd (and final) time the alarm rings it will not 
be repeated but the phone remains on, in the alarm display mode, for up to 15 minutes after 
which it will revert back to the state it was in before the alarm time was reached.

2. If the phone is in a transitory state (during power off for example) at the time of an alarm it 

will be delayed until after the transitory state has finished.

3. If the alarm time is reached during a call a special 'In Call' alert beep will sound and visual 

alerts will appear every 3 minutes. The alarm can be validated in the normal way.

4. If the alarm time is reached during an outgoing, or incoming call setup sequence, the alarm is 

suspended until the call is established and the mobile behaves as in 3 above.

5. If the battery is detached within 15 minutes of the alarm time the alarm will sound immedia-

tely. If later than 15 minutes only the visual indicators will be shown. Press the Valid softkey to 
validate and stop the alarm.

Press 

.

 

Select 

Office Tools

.

Select 

Alarm clock

.

Select 

Off

. Confirmation will be displayed.

Press 

Exit

   or  to return to the standby display.

Caution

 - Please remember to turn off the alarm feature when board-

ing an aircraft where the use of a mobile phone is not permitted and 
is illegal. Alternatively you can remove the battery after turning off the 
phone. See the General safety warnings in 

First steps with your Sirius

.

4

1
2

3

4

Содержание Trium SIRIUS

























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды