65
DISASSEMBLY PROCEDURE
11
OPERATING PROCEDURE
PHOTOS&ILLUSTRATIONS
1. Removing the air intake grille
(1) Slide the knob of air intake grille to the direction of the
arrow
1
to open the air intake grille.
(2) Remove the string hook from the panel to pretend the
grille from dropping.
(3) Slide the shaft in the hinge to the direction of the arrow
2
and remove the air intake grille.
4. Removing the electrical parts
(1) Remove the 2 screws and the control box cover.
<Electrical parts in the control box>
• Indoor controller board
• Compressor contactor
• Fuse
• Varistor
• Terminal block
Be careful on removing heavy parts.
Photo 3
Figure 1
Air intake grille
Grille
2. Removing the fan guard
(1) Open the air intake grille.
(2) Remove the 3 screws of fan guard.
Air intake grille knob
3. Removing the panel
(1) Remove the air intake grille.(See figure 1)
Corner panel (See figure 2)
(1) Remove the screw of the corner.
(2) Slide the corner panel to the direction of the arrow
3
, and
remove the corner panel.
Panel (See photo 2)
(1) Disconnect the connector that connects with the unit.
(2) Remove the 2 screws from the panel and loose another 2
screws, which fixed to the oval hole, have different diameter.
(3) Rotate the panel a little to remove the screws.(Slide the
panel so that the screw comes to a large diameter of the
oval hole, which has two different diameters.)
Photo 1
Screws
Air intake grille
Photo 2
Figure 2
Corner
panel
Screw
Corner
panel
Panel
Panel
Screws
Connectors
Screws
Fan guard
Indoor controller board
Varistor
Fuse
Indoor
controller box
Terminal blocks
Compressor contactor
Panel
SLH-1AR.TH SLH-1.6AR.TH SLH-2AR.TH
SLH-1AR
1
.TH SLH-1.6AR
1
.TH SLH-2AR
1
.TH
SL-1AR.TH SL-1.6AR.TH SL-2AR.TH
SL-1AR.TH-T SL-1.6AR.TH-T SL-2AR.TH-T
OC280-B-3.qxp 03.5.23 1:06 PM Page 65
Содержание SL Series
Страница 73: ...OC280 B 3 qxp 03 5 23 1 07 PM Page 73 ...