Mitsubishi Electric PUHY-P250YHM-A, Справочник данных

Страница: 44 / 101

42
! ! !
. Outdoor Unit
1. Specifications
Model
Set Model
Power source
PUHY-P250YHM-A PUHY-P500YSHM-A
PUHY-P250YHM-A PUHY-P250YHM-A PUHY-P350YHM-A PUHY-P400YHM-A
3-phase 4-wire 380-400-415V 50/60Hz
Sound pressure level
(measured in anechoic room)
dB <A>
57
Refrigerant
piping diameter
Liquid pipe mm(in.)
9.52 (3/8) Brazed
(12.7 (1/2) Brazed,total length>=90m)
Gas pipe mm(in.) 22.2 (7/8) Brazed
60
15.88 (5/8) Brazed
28.58 (1-1/8) Brazed
FAN Type x Quantity Propeller fan x 1 Propeller fan x 1
Air flow rate m
3
/ min 185
L/s 3,083
cfm 6,532
185
3,083
6,532
Control, Driving
mechanism
Inverter-control,
Direct-driven by motor
Inverter-control,
Direct-driven by motor
Motor output kW
0.46 x 1
External static press.
0Pa(0mmH
2
O)
0.46 x 1
0Pa(0mmH
2
O)
Propeller fan x 1
185
3,083
6,532
Inverter-control,
Direct-driven by motor
0.46 x 1
0Pa(0mmH
2
O)
Compressor Type x Quantity Inverter scroll hermetic compressor
Manufacture MITSUBISHI ELECTRIC CORPORATION
Starting method
Inverter
Motor output kW
6.7
Case heater kW
0.035
Lubricant
MEL32
Inverter
6.7
0.035
MEL32
Inverter
6.7
0.035
MEL32
External finish
Pre-coated galvanized steel sheets
<MUNSELL 5Y 8/1 or similar>
External dimension HxWxD mm
1710(without legs 1650) x920x760
in.
mm(in)
mm(in)
67-3/8(without legs 65) x36-1/4x29-15/16
Protection
devices
High pressure
protection High pres. Sensor & High pres.
Switch at 4.15 MPa (601psi)
Inverter circuit
(COMP. / FAN)
Over-heat protection,
Over-current protection
Compressor Over-heat protection
Fan motor
Liquid pipe
Gas pipe
Thermal switch
Refrigerant Type x original charge R410A x 9.0 kg (20lb)
1710(without legs 1650) x920x760
67-3/8(without legs 65) x36-1/4x29-15/16
High pres. Sensor & High pres.
Switch at 4.15 MPa (601psi)
Over-heat protection,
Over-current protection
Over-heat protection
Thermal switch
R410A x 9.0 kg (20lb)
Control LEV and HIC circuit LEV and HIC circuit
Ne
Pipe between
unit and
distributor
t weight kg(lbs) 200 (441)
–
–
–
–
Heat exchanger Salt-resistant cross fin & copper tube
HIC circuit (HIC: Heat Inter-Changer)
Copper pipe,pipe-in-pipe structure
200 (441)
Salt-resistant cross fin & copper tube
Copper pipe,pipe-in-pipe structure
Auto-defrost mode (Reversed refrigerant circle)
WKB94G533
Installation Manual
Refrigerant conn. pipe
Outdoor Twinning Kit : CMY-Y100VBK2
WKE94C140 WKE94C140
Defrosting method
Auto-defrost mode
(Reversed refrigerant circle)
Drawing External WKB94G531
Wiring WKE94C140
Standard
attachment
Document Installation Manual
Accessory Refrigerant conn. pipe
Optional parts
Remark •Details on foundation work, duct work, insulation work, electrical wiring, power source switch, and other items shall be referred
to the Installation Manual.
Note : Unit converter
kcal =kW x 860
BTU/h =kW x 3,412
cfm =m
3
/min x 35.31
lb =kg / 0.4536
* Due to continuing improvement, above specifications may be subject to change without notice.
*Above specification data is
subject to rounding variation.
* External static pressure option is available (30Pa, 60Pa / 3.06mmH
2
O, 6.12mmH
2
O).
9.52 (3/8) Brazed
22.7 (7/8) Brazed
PUHY-P750YSHM-A
63.5
19.05 (3/4) Brazed
34.93 (1-3/8) Brazed
Propeller fan x 1
225
3,750
7,945
Inverter-control,
Direct-driven by motor
0.46 x 1
0Pa(0mmH
2
O)
Inverter
10.3
0.045
MEL32
1710(without legs 1650) x1,220x760
67-3/8(without legs 65) x48-1/16x29-15/16
High pres. Sensor & High pres.
Switch at 4.15 MPa (601psi)
Over-heat protection,
Over-current protection
Over-heat protection
Thermal switch
R410A x 11.5 kg (26lb)
LEV and HIC circuit
245 (541)
Salt-resistant cross fin & copper tube
Copper pipe,pipe-in-pipe structure
Auto-defrost mode (Reversed refrigerant circle)
WKB94G535
Installation Manual
Refrigerant conn. pipe
Outdoor Twinning Kit : CMY-Y200VBK2
WKE94C140
12.7 (1/2) Brazed
28.58 (1-1/8) Brazed
Propeller fan x 1
225
3,750
7,945
Inverter-control,
Direct-driven by motor
0.46 x 1
0Pa(0mmH
2
O)
Inverter
10.5
0.045
MEL32
1710(without legs 1650) x1,220x760
67-3/8(without legs 65) x48-1/16x29-15/16
High pres. Sensor & High pres.
Switch at 4.15 MPa (601psi)
Over-heat protection,
Over-current protection
Over-heat protection
Thermal switch
R410A x 11.5 kg (26lb)
245 (541)
WKE94C140
15.88 (5/8) Brazed
28.58 (1-1/8) Brazed
1710(without legs 1650) x920x760
67-3/8(without legs 65) x36-1/4x29-15/16
High pres. Sensor & High pres.
Switch at 4.15 MPa (601psi)
Over-heat protection,
Over-current protection
Over-heat protection
Thermal switch
R410A x 9.0 kg (20lb)
200 (441)
9.52 (3/8) Brazed
22.7 (7/8) Brazed