Mitsubishi Electric PEV-P200YM-A, Руководство по эксплуатации

Страница: 8 / 47

8
5. Operation
5.1. Turning ON/OFF
<ON>
Press the
ON/OFF
button.
The ON/OFF lamp will light up in green, and the operation will start.
<OFF>
Press the
ON/OFF
button again.
The ON/OFF lamp will come off, and the operation will stop.
<Operation status memory>
Remote controller setting
Operation mode Operation mode before the power was turned off
Preset temperature Preset temperature before the power was turned off
Fan speed Fan speed before the power was turned off
<Settable preset temperature range>
Operation mode Preset temperature range
Cool/Dry 19 ~ 30 ºC (67 ~ 87 ºF)
Heat 17 ~ 28 ºC (63 ~ 83 ºF)
Auto (Single set point) 19 ~ 28 ºC (67 ~ 83 ºF)
Auto (Dual set points)
[Cool]
Preset temperature range for the Cool mode
Fan/Ventilation Not settable
The settable temperature range varies with the model of indoor units.
5.2. Mode select
Press the F1 button to go through the operation modes in the order of
"Cool, Dry, Fan." Select the desired operation mode.
Cool Dry Fan
• Operation modes that are not available to the connected indoor unit
models will not appear on the display.
F1 F2 F3 F4
Cool
Room
Auto Set temp.
Mode Temp. Fan
Fri
What the blinking mode icon means
The mode icon will blink when other indoor units in the same
refrigerant system (connected to the same outdoor unit) are already
operated in a different mode. In this case, the rest of the unit in the
same group can only be operated in the same mode.