Mitsubishi Electric PEA-RP200WKA, Руководство по обслуживанию, Страница: 45 / 48

43
FUNCTION SETTINGS (Function selection via the remote controller)
11
Function setting on the unit (Selecting the unit functions)
1 [Fig 11.1]
• Select “Service” from the Main menu, and press the [SELECT] button.
2 [Fig 11.2]
• Set the indoor unit refrigerant addresses and unit numbers with the [F1] through [F4] buttons, and then press the [SELECT] button to confirm the current
setting.
3 [Fig 11.3]
• When data collection from the indoor units is completed, the current settings appears highlighted. Non-highlighted items indicate that no function settings are
made. Screen appearance varies depending on the “Unit No.” setting.
4 [Fig 11.4]
• Use the [F1] or [F2] button to move the cursor to select the mode number, and change the setting number with the [F3] or [F4] button.
5
[Fig 11.5]
• When the settings are completed, press the [SELECT] button to send the setting data from the remote controller to the indoor units.
• When the transmission is successfully completed, the screen will return to the Function setting screen.
• Select “Function setting” with the [F1] or [F2] button, and press the [SELECT] button.
<Checking the Indoor unit No.>
When the [SELECT] button is pressed, the target indoor unit will start fan operation. If the unit is common or when running all units, all indoor units for the
selected refrigerant address will start fan operation.
[Fig. 11.3] [Fig. 11.2] [Fig. 11.1]
[Fig. 11.5] [Fig. 11.4]
F1 F2 F3 F4
Service menu
Cursor
Main menu:
Test run
Input maintenance info.
Function setting
Check
Self check
F1 F2 F3 F4
Function setting
Cursor Address
Monitor:
Ref. address
Unit No.
Grp. /1/2/3/4/All
F1 F2 F3 F4
Function setting
Cursor Cursor
Request:
Ref. address
Mode 1
Mode 2
Mode 3
Mode 4 Grp.
F1 F2 F3 F4
Function setting
Cursor Cursor
Request:
Ref. address
Mode 7
Mode 8
Mode 9
Mode 10
Unit # 1
F1 F2 F3 F4
Function setting
Ref. address
Sending data
HWE17030.qxd 17.11.9 16:28 Page 43