Mitsubishi Electric PEA-M200LA, Техническое и сервисное руководство

Страница: 45 / 48

[
XI
Electrical work ]
- 42 -
HWE20020 GB
 Use the [F1] or [F2] button to move the cursor to select the mode number, and change the setting number with the [F3] or [F4]
button.
 When the settings are completed, press the [SELECT] button to send the setting data from the remote controller to the indoor
units.
 When the transmission is successfully completed, the screen will return to the Function setting screen.
Function table 1
Select unit number 00
Function table 2
Select unit numbers 01 to 04 or all units (AL [wired remote controller]/07 [wireless remote controller])
*1 When the power supply returns, the air conditioner will start 3 minutes later.
*2 Power failure automatic recovery initial setting depends on the connecting outdoor unit.
When the function of an indoor unit were changed by function selection after the end of installation, always indicate the con-
tents by entering a or other mark in the appropriate check filed of the tables.
Mode Settings Mode no. Setting no. Initial setting Check
Power failure automatic recovery
(AUTO RESTART FUNCTION)
Not available
01
1 *2
Available*1 2 *2
Indoor temperature detecting
Indoor unit operating average
02
1
Set by indoor unit’s remote controller 2
Remote controller’s internal sensor 3
LOSSNAY connectivity
Not Supported
03
1
Supported (indoor unit is not equipped with outdoor-air intake) 2
Supported (indoor unit is equipped with outdoor-air intake) 3
Power voltage
240V
04
1
220V, 230V 2
Auto mode
Energy saving cycle automatically enabled
05
1
Energy saving cycle automatically disabled 2
Mode Settings Mode no. Setting no. Initial setting Check
Filter sign
100 Hr
07
1
2500 Hr 2
No filter sign indicator 3
External static pressure
08
1
2
3
10
1
2
3
External static pressure
Setting no. of
mode no. 08
Setting no. of
mode no. 10
1 1 a P 0 6
75 Pa (before shipment)
2 1
1
3 a P 0 0 1
2 1 a P 0 5 1
2 2 a P 0 0 2
HWE20020.book 42 ページ ２０２０年１１月２７日 金曜日 午前１０時４５分