Mitsubishi Electric PEA-M200LA, Техническое и сервисное руководство

Страница: 41 / 48

[
X
Disassembly Procedure ]
- 38 -
HWE20020 GB
3. Thermistor (Condenser/evaporator) (Liquid pipe)
4. Drain pan
1. Remove the control box cover according to the
procedure in section 1.
2. Removing the maintenance cover
(1) Remove the nine fixing screws on the cover (D),
cover (E), and cover (F) to remove the maintenance
cover.
3. Removing the thermistor
(1) Disconnect the thermistor connector (CN44) from
the Indoor controller board.
(2) Remove the thermistor (G) from the thermistor
holder (H) on the copper tube.
Thermistor size
Liquid pipe: ø8 mm
Condenser/evaporator: ø6 mm
Exercise caution when removing heavy parts.
Fig. 3
Fig. 4
(F) (E) (D)
(G), (H) Indoor controler
board
1. Removing the bottom plate
(1) Remove the twelve fixing screws on the bottom
plate (J) to remove it.
2. Removing the drain pan
(1) Pull out the drain pan (K) in the direction of
the arrow.
Exercise caution when removing heavy parts.
Fig. 5
Fig. 6
(J)
(K)
Note: Drain the water out of the drain pan before removing it.
HWE20020.book 38 ページ ２０２０年１１月２７日 金曜日 午前１０時４５分