Mitsubishi Electric PEA-M200LA, Техническое и сервисное руководство

Страница: 15 / 48

[
II
Part Names and Functions ]
- 12 -
HWE20020 GB
Main menu list
Main menu Setting items Setting details
Operation Vane•Louver•Vent.
(Lossnay) Use to set the vane angle.
• Select a desired vane setting from five different settings.
Use to turn ON/OFF the louver.
• Select a desired setting from “ON” and “OFF.”
Use to set the amount of ventilation.
• Select a desired setting from “Off,” “Low,” and “High.”
High power Use to reach the comfortable room temperature quickly.
• Units can be operated in the High-power mode for up to 30 minutes.
Comfort Manual
vane
angle Use to fix each vane angle.
Timer Timer On/Off
timer Use to set the operation On/Off times.
• Time can be set in 5-minute increments.
* Clock setting is required.
Auto-Off
timer Use to set the Auto-Off time.
• Time can be set to a value from 30 to 240 in 10-minute increments.
Weekly timer Use to set the weekly operation On/Off times.
• Up to eight operation patterns can be set for each day.
• Two types of weekly schedules can be set.
* Clock setting is required.
* Not valid when the On/Off timer is enabled.
* 1ºC increments
OU silent mode Use to set the time periods in which priority is given to quiet operation of outdoor
units over temperature control. Set the Start/Stop times for each day of the week.
• Select the desired silent level from “Normal,” “Middle,” and “Quiet.”
* Clock setting is required.
Night setback Use to make Night setback settings.
• Select “Yes” to enable the setting, and “No” to disable the setting.
The temperature range and the start/stop times can be set.
* Clock setting is required.
* 1ºC increments
Energy
saving Restriction Temp.
range
Use to restrict the preset temperature range.
• Different temperature ranges can be set for different operation modes.
* 1ºC increments
Operation
locked Use to lock selected functions.
• The locked functions cannot be operated.
Energy
saving Auto
return Use to get the units to operate at the preset temperature after performing
energy-save operation for a specified time period.
• Time can be set to a value from 30 and 120 in 10-minute increments.
* This function will not be valid when the preset temperature ranges are restricted.
* 1ºC increments
Schedule Set the start/stop times to operate the units in the energy-save mode for each day
of the week, and set the energy-saving rate.
• Up to four energy-save operation patterns can be set for each day.
• Time can be set in 5-minute increments.
• Energy-saving rate can be set to a value from 0% and 50 to 90% in 10% increments.
* Clock setting is required.
HWE20020.book 12 ページ ２０２０年１１月２７日 金曜日 午前１０時４５分