5
GB
D
F
I
NL
E
SW
P
PAR-21MAA
ON/OFF
FILTER
CHECK
OPERATION
CLEAR
TEST
TEMP.
MENU
BACK
DAY
MONITOR/SET
CLOCK
ON/OFF
1
4
5
67
8
9
0
A
B
C
2
3
˚F˚C
˚F˚C
ERROR CODE
AFTER
TIMER
TIME SUN MON TUE WED THU FRI SAT
ON
OFF
Hr
AFTER
FILTER
FUNCTION
ONLY1Hr.
WEEKLY
SIMPLE
AUTO OFF
A
C
D
E
F
G H
J K
M
I
L
N
O
P
B
1
Set Temperature buttons
Down
Up
2
Timer Menu button (Monitor/Set button)
3
Mode button (Return button)
4
Set Time buttons
Back
Ahead
5
Timer On/Off button (Set Day button)
6
Louver button (
Operation button)
To preceding operation number.
7
Ventilation button (
Operation button)
To next operation number.
8
ON/OFF button
9
Fan Speed button
Opening the door.
0
Filter
button (<Enter> button)
A
Test Run button
B
Check button (Clear button)
C
Airflow Up/Down button
Notes:
•
If you press a button for a feature that is not installed at the indoor unit,
the remote controller will display the “Not Available” message.
•
If you are using the remote controller to drive multiple indoor units, this
message will appear only if the feature is not present at the parent unit.
•
Never expose the remote controller to direct sunlight. Doing so can re-
sult in the erroneous measurement of room temperature.
•
Never place any obstacle around the lower right-hand section of the re-
mote controller. Doing so can result in the erroneous measurement of
room temperature.
A
Day-of-Week
Shows the current day of the week.
Time/Timer Display
Shows the current time, unless the simple or Auto Off timer is set.
If the simple or Auto Off timer is set, shows the time remaining.
B
“Sensor” indication
Displayed when the remote controller sensor is used.
C
Identifies the current operation
Shows the operating mode, etc.
* Multilanguage display is supported.
D
“Centrally Controlled” indicator
Indicates that operation of the remote controller has been prohibited by a main controller.
E
“Timer Is Off” indicator
Indicates that the timer is off.
F
Temperature Setting
Shows the target temperature.
G
Up/Down Air Direction indicator
The indicator
shows the direction of the outcoming airflow.
H
“One Hour Only” indicator
Displayed if the airflow is set to weak and downward during COOL or DRY mode. (Opera-
tion varies according to model.)
The indicator goes off after one hour, at which time the airflow direction also changes.
I
Louver display
Indicates the action of the swing louver. Does not appear if the louver is stationary.
J
Room Temperature display
Shows the room temperature.
K
(Power On indicator)
Indicates that the power is on.
L
Ventilation indicator
Appears when the unit is running in Ventilation mode.
M
Fan Speed indicator
Shows the selected fan speed.
N
“Locked” indicator
Indicates that remote controller buttons have been locked.
O
“Clean The Filter” indicator
Comes on when it is time to clean the filter.
P
Timer indicators
The indicator comes on if the corresponding timer is set.
Note:
•
For purposes of this explanation, all parts of the display are shown as lit.
During actual operation, only the relevant items will be lit.
Remote controller-Button
Remote controller-Display
3. Operation
•
In case of using LCD remote controller, refer this operation manual or remote
controller operation manual to operate the unit.