Mitsubishi Electric PD-5010, Руководство по обслуживанию

Страница: 33 / 75

6
(11) In the same manner, press the FORMAT key and select [N ARROW
→
STANDARD
→
ST RETCHED
→
ZOOM
→
U-
SCAN] in this order. Adjust the screen position so that the screen can be arranged evenly to the top,
bottom, right, and left. Confirm that [H PHA] and [H CLK] are 0. Otherwise, press the cursor keys [<] and
[>] to adjust them to 0.
(12) This should be done only if SECAM is adjusted as per (2) above.
Press the [ ENTER/MENU ] key to display the D-CONTROL menu and adjust the cursor to C-SYSTEM by
means of the cursor keys [ ] and [V]. Select [A1] by means of the cursor keys [<] and [>].
(13) Withdraw the factory setting mode.
5-2. Adjustment of DVD/HD screen position
(Caution) Adjustments should be started after returning the [VIDEO] and [SCREEN] setting of the main menu
to the initial setting conditions.
(1) Enter an input of HDTV monoscopic signal in the DVD/HD1 IN terminal. Use the [ MENU/ENTER ] key of the
remote control to select [HD SELECT] of [OPTION] of the main menu. Make setting at [1035i] by press-
ing the cursor keys [<] and [>].
(2) Select [HD IN] with the remote control or the main-unit front key. Confirm that the screen position is
uniformly arranged to the top, bottom, right, and left. If the screen position is found to be unevenly
arranged, make adjustments according to the “method of screen position adjustment” shown below. (The
screen size is FULL only.)
(3) Select the NTSC COMPONENT signal (480i) for the input video signal and change over the screen size
in the sequential order of [ST
RETCHED
→
ZOOM
→
N ARROW
→
STANDARD ]. Confirm in each screen that
the screen position is uniformly arranged to the top, bottom, right, and left. If the screen position is found to be
unevenly arranged, make adjustments according to the “method of screen position adjustment” shown
below.
(4) Select the PAL COMPONENT signal (5760i) for the input video signal and change over the screen size
in the sequential order of
[STRETCHED ZOOM NARROW STANDARD] . Confirm in each screen that the
screen position is uniformly arranged to the top, bottom, right, and left. If the screen position is found to
be unevenly arranged, make adjustments according to the “method of screen position adjustment” shown
below.
(5) Select the DTC 1080i signal for the input video signal. Select [HD SELECT] of the screen. Make setting
at [1035B] by pressing the cursor keys [<] and [>]. Confirm that the screen position is uniformly arranged
to the top, bottom, right, and left.
If the screen position is found to be unevenly arranged, make adjustments according to the “method of
screen position adjustment” shown below. (The screen size is FULL only.)
V
D-CONTROL
SECAM
CONT 0 SUB CONT 8
BRIGHT 0 Y LEVEL 41
COLOR 56 C-LEVEL 31
B-Y 4
C-Y 12
C-SYSTEM A1
ENTER NEXT EXIT PREV 2/8
Displayed only for SECAM