51
Function settings
2
Touch the
[Mode]
button to select one of the
following energy-save control modes that reduces
energy-consumption during vacancy.
The default setting is “Non-use.”
•
Non-use: Deactivates the energy-save control
assist function.
•
Thermo-off
*1
: Puts the unit into the Thermo-off
state.
•
Set temperature offset
*1*2
: Offsets the set
temperature.
•
Fan speed down
*3
: Sets the fan speed to “Low.”
•
ON/OFF: Turns off the unit.
*1 When using the energy-save function of other system
controllers in combination with the energy-save control
assist function of the Smart ME Controller, do not
select “Thermo-off” or “Set temperature offset.”
*2 When the units are operated in the Fan mode, or
when the set temperature setting is prohibited from the
centralized controller, the set temperature will not be
offset.
*3 If the connected indoor unit does not support the
fan speed adjustment function, this item will not be
displayed.
When the occupancy sensor detects occupancy
during the energy-save control, the original
operating status will be restored.
However, when the operating status is changed
by other controllers or by the scheduled or timer-
controlled events, the current operating status will
be retained even if the occupancy sensor detects
occupancy.
<Note>
•
To use the energy-save control assist function in a
system with both main and sub remote controllers,
activate the function only on the remote controller
whose coverage area is the largest.
Содержание par-u02meda
Страница 9: ...9 Safety precautions ...
