Mitsubishi Electric par-u02meda, Инструкция

Страница: 45 / 80

45
Function settings
Night setback
The Night setback function starts heating operation when a given group is stopped and
the room temperature drops below the specified lower limit temperature. Also, this function
starts cooling operation when a given group is stopped and the room temperature rises
above the specified upper limit temperature.
* If the room temperature is measured by the return air temperature sensor on the air conditioning unit,
the measured value may not be an accurate representation of the temperature in the room, especially
when the air conditioning unit is stopped and the room air is stagnant. When this is the case, use an
external temperature sensor (PAC-SE40TSA/PAC-SE41TS-E) or remote controller sensor to measure
the room temperature.
Button operation
1
Select
[Night setback]
from the Menu.
The Night setback function will not work
in the following cases:
when the unit is in
operation, when the Night setback function is
disabled, during an error, during test run, when
the clock is not set, when the ON/OFF operation,
set temperature setting, or timer execution is
prohibited from the centralized controller.
The Night setback function will be cancelled when
the ON/OFF operation, operation mode setting, or
set temperature setting is made from the remote
controller while the Night setback function is
executed.
2
The default setting is “Disabled.”
To activate the Night setback function, touch the
[Disabled]
button to change it to
[Enabled]
.
To continue making detailed settings, touch to
access the settings screen.
P