Mitsubishi Electric PAR-SL101A-E Series, Руководство по эксплуатации и инструкция по установке

Страница: 38 / 512

Operation details
Setting
No.
Operation Description
1 Connecting with
the router (WPS)
This setting No. is for when connecting the Wi-Fi interface to the router using WPS. Select the setting No. and
press the
button
5
, then press the WPS button of the router within 2 minutes to complete the setup.
The operation indicator lamp near the signal receiver of the indoor unit repeats the following operation during the
process of setup: ON for 3 seconds, blinks twice, and OFF for 2.5 seconds.
Note: The indoor unit does not beep during the process of setup.
2 Connecting with
the router (AP)
This setting No. is for when connecting the Wi-Fi interface to the router in AP mode. Select the setting No. and
press the
button
5
, then complete the network setup, within 10 minutes.
Make the network settings by referring to the manual for the cloud service.
The operation indicator lamp near the signal receiver of the indoor unit repeats the following operation during the
process of setup: ON for 3 seconds, blinks once, and OFF for 2.5 seconds.
Note: The indoor unit does not beep during the process of setup.
3 Rebooting the
Wi-Fi interface
Select this setting No. when rebooting the Wi-Fi interface such as when the router cannot be connected to it
normally. Set up the connection again at 30 or more seconds after rebooting.
The indoor unit beeps and the operation indicator lamp blinks as below during the process of rebooting.
4 Initializing the
Wi-Fi interface
Select this setting No. when resetting the Wi-Fi interface to the factory setting such as when the air conditioner is
relocated or discarded or the user changes.
The indoor unit beeps and the operation indicator lamp blinks as below during the process of initialization.
The indoor unit beeps and the operation indicator lamp blinks as below when the connection between the Wi-
Fi interface and the router is complete or failed.
When connection is complete
When connection is failed
Beep Beep Lamp
OFF
0.1 sec.
Lamp ON
0.1 sec.
Lamp ON
0.1 sec.
1st 2nd
Beep Beep Beep Beep
Lamp ON
0.1 sec.
Lamp ON
0.1 sec.
Lamp ON
0.1 sec.
Lamp ON
0.1 sec.
Lamp
OFF
0.1 sec. 4th
3rd 2nd 1st
Lamp
OFF
0.1 sec.
Lamp
OFF
0.1 sec.
Beep (1 sec.)
Lamp OFF
1 sec.
Lamp ON
5 sec.
Beep Beep Beep Beep
Beep
Lamp OFF
1 sec.
Lamp ON
0.5 sec.
Lamp ON
0.5 sec.
Lamp ON
0.5 sec.
Lamp ON
0.5 sec.
Lamp ON
0.5 sec.
4th 5th 3rd
2nd
1st
Lamp
OFF
0.5 sec.
Lamp
OFF
0.5 sec.
Lamp
OFF
0.5 sec.
Lamp
OFF
0.5 sec.
20
8. Wi-Fi interface setting
en
VH79A034H01_IB_IM_01en.indd 20 2021/06/01 13:13:06
038