Mitsubishi Electric PAR-SL101A-E Series, Руководство по эксплуатации и инструкция по установке

Страница: 20 / 512

Check that the box includes the following parts in addition to this installation manual:
Parts Name Quantity
Wireless remote controller 1
Remote controller holder 1
LR6 AA alkaline battery 2
Tapping screws 3.5 × 16 2
Only use LR6 AA batteries. Replace low batteries with new LR6 AA batteries. Observe the polarity of the batteries as
indicated, and insert the negative end first.
2
CAUTION
■
Do not install in any place exposed to flammable gas leakage.
• Flammable gases accumulated around the body of PAR-SL101A-E may cause an explosion.
■
Do not use in any special environment.
• Using in any place exposed to oil (including machine oil), steam and sulfuric gas may deteriorate the performance
significantly or give damage to the component parts.
■
Do not wash with water.
• Doing so may cause an electric shock or a malfunction.
■
Do not install in any place at a temperature of more than 40 °C (104 °F) or less than 0 °C (32 °F) or exposed to
direct sunlight.
■
Do not install in any steamy place such a bathroom or kitchen.
• Avoid any place where moisture is condensed into dew. Doing so may cause an electric shock or a malfunction.
■
Do not install in any place where acidic or alkaline solution or special spray are often used.
• Doing so may cause an electric shock or malfunction.
■
Do not touch any circuit board with your hands or with tools. Do not allow dust to collect on the circuit board.
•
Doing so may cause fire or an electric shock.
■
Do not touch any control button with your wet hands.
• Doing so may cause an electric shock or a malfunction.
■
Do not press any control button using a sharp object.
• Doing so may cause an electric shock or a malfunction.
1. Safety Precautions
2. Confirming the Supplied Parts
en
VH79A034H01_IB_IM_01en.indd 2 2021/06/01 13:12:58
020