5
GB
3. Name of Component
• Wireless Remote Controller
∗
The following example is for explanatory purposes only and shows the operating section when all
the LCD displays are lit. It differs from the actual display. The LCD will remain dark while the
remote controller is not in operation.
Trancemitter
Point this section to the Signal
Receiving Unit.
ON/OFF
NOT AVAILABLE
˚C
AM
PM
AM
PM
CHECK
TEST RUN
CLOCK
MODE
FAN
VANE
STOP
START
HR.
MIN.
TEMP.
ON/OFF
NOT AVAILABLE
˚C
AM
PM
AM
PM
CHECK
TEST RUN
Operation mode
display ................. Page 10
Battery
voltage low ............ Page 8
display ............. Page 12
Transmission
mark .................... Page 10
Vane ......... Page 11
Fan ........... Page 11
Temperature ........ Page 10
adjusting button
Power ON/OFF
button .................. Page 10
MODE button ....... Page 10
FAN button ........... Page 11
VANE button ........ Page 11
STOP, START (TIMER SET)
button .................... Page 12
HR. MIN. button .. Pages 9, 12
CLOCK button ........ Page 9
Pre-set
temperature ......... Page 10
Current time ........... Page 9
display
Timer time ........... Page 12
display .............. Page 13
display .... Page 12
display ....... Pages 9, 12
When the Cover is Open.